Download Miller Electric Coolmate V3 Work Light User Manual

Audio dubbing
If you connect audio equipment, you can add sound to your recorded tape already
recorded in the 12-bit mode by specifying the start and end points. The original sound
will not be erased.
Select one of the following connections to add audio.
Connecting the microphone with the MIC jack
MIC
(PLUG IN
POWER)
: Signal flow
Microphone (optional)
You can check recorded picture and sound by connecting your camcorder to a TV with
the A/V connecting cable.
Recorded sound is not output from the speaker. Check the sound by using a TV or
headphones.
Connecting the microphone to the intelligent accessory shoe
Intelligent accessory shoe
Microphone (optional)
94