Download Dell 28XX Switch User Manual

Transcript
Figure 7-11. Green Ethernet Configuration
•
Cumulative Energy Saved — The total amount of energy saved since the last reset. This amount is
equal to the saved power multiplied by the time period in hours.
–
Reset — Click to set the Cumulative Power Saved counter back to 0.
•
— Indicates whether the Energy-Detect saving mode is on or off for the device ports.
•
Link Short-Reach Energy Mode — Indicates whether the Short-Reach energy saving mode is on or off
for the device ports.
•
Current Power Consumption — The power currently consumed by all ports (including both those
with links up and links down).
•
Power Saving — The percentage of power saved. For example, a Power Saving value of % indicates that
just % of the power that would normally be used (without Green Ethernet) is currently being used.
The Green Ethernet Ports Table includes the following port energy saving information:
•
Port — Indicates the port.
•
Energy-Detect — The status of the Energy-Detect mode on the link:
–
Admin — Whether the Energy-Detect has been enabled for the port.
Dell PowerConnect 28xx Systems User Guide
107