1
Download Cisco Systems 6500 Switch User Manual
Transcript
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands show cam notification This example shows how to display CAM notification information for ports 1-6 on module 2: Console> show cam notification 2/1-6 Mod/Port Added Removed --------- -------- -------2/1 enabled disabled 2/2 enabled disabled 2/3 enabled enabled 2/4 enabled enabled 2/5 disabled enabled 2/6 disabled enabled Console> This example shows how to display CAM notification intervals: Console> show cam notification interval CAM notification interval = 10 second(s). Console> This example shows how to display CAM notification history information: Console> show cam notification history Index Timestamp Operation Address Vlan Mod/Port =============================================================================== 4 16676708 Unlearned 00:00:00:00:00:64 2 2/6 Unlearned 00:00:00:00:00:63 2 2/6 Unlearned 00:00:00:00:00:62 2 2/6 Learned 00:00:00:00:00:61 2 2/4 Learned 00:00:00:00:00:60 2 2/4 Unlearned 00:00:00:00:00:5f 2 2/4 Unlearned 00:00:00:00:00:5e 2 2/5 5 16697903 Learned 00:00:00:00:00:1a 1 2/1 Console> This example shows how to display CAM notification history size information: Console> show cam notification historysize MAC address change history log size = 300 Console> This example shows how to display CAM notification configuration information: Console> show cam notification all MAC address change detection enabled CAM notification interval = 15 second(s). MAC address change history log size = 1 MAC addresses added = 22936547 MAC addresses removed = 262132 MAC addresses added overflowed = 0 MAC addresses removed overflowed = 0 MAC address SNMP traps generated = 0 MAC address move notification disabled CAM notification threshold disabled CAM notification threshold limit = 100% CAM notification threshold interval = 120 seconds Console> Catalyst 6500 Series Switch Command Reference—Release 8.1 78-15474-01 2-714
