Download AEG PROTECT A. 700 Operating instructions

2
System Description
i
PROTECT B. is an uninterruptible power supply
(UPS) for essential loads such as PCs,
workstations, servers, network components,
telecommunication equipment and similar
devices.
The PROTECT B. series is a compact, interactive,
sinusoidaly operating USP, available with an output power
rate of 750, 1000, 1500, 2000 and 3000 VA.
The design of the USP allows horizontal / lying operation
(Rack/19” with 2U) and vertical / standing operation (Tower).
2.1
Overview
The front of the USV provides several LEDs and four push
buttons for easy configuration, control and management. The
panel also informs about the state of the power in the
alternating current (AC) branch, indications on net failures
and the charging state of the Output of the USP. You will find
two LED bars for output load and battery capacity, two state
indicators (net available, battery active) and four alarm
indicators (power failure, failure, battery discharged,
overload). With the push button the acoustic alarm can be
deactivated and the self test of the UPS will be started.
Power
connectors,
communication
interfaces
and
connections for telephone and network are located on the
rear of the PROTECT B. Important USV parameters and data
are constantly monitored and are transmitted via USB or
serial RS232 to the CompuWatch Software on the
management computer. The optional SNMP adapter allows
remote monitoring via SNMP connector and multi server
shutdown (starting with B. 1500).
The main features of the PROTECT B. are:
♦ VI (Line Interactive) protection technology with
sinusoidal output voltage
7