Download Miele M636EC Technical data

Installing integrated "i" Dishwashers
^ Adjust the door front height on one
side and lightly screw in a T20 Torx
screw on this side.
^ Adjust the door front height on the
other side and also lightly screw in a
T20 Torx screw on this side.
^ Close the dishwasher door.
^ Check the alignment of the door
panel.
^ If it is not correctly aligned you may
need to loosen the screws and readjust it to the correct alignment.
Once the door front is correctly
positioned:
^ Open the dishwasher door.
^ Tighten all the Torx screws on the
sides.
^ Plug the openings for the fixing
screws using the plastic stoppers
provided.
,Door fronts differ in weight and it
is therefore essential that the door
springs are adjusted after the door
front has been fitted. See Step 7.
17