Download Andrew operation and maintenance Specifications

Subreflector
Assembly
Step 1
302769
Apex Angle Bracket
Loosely attach four 302767 Subreflector Struts together with the four 302769 Apex Angle
Brackets as shown in Figure 12. Note: The struts are not connected to the reflector at
this time.
3/8”
Flat Washer
(9997-145)
3/8 x 2-1/4”
Hex Head
Capscrew
(9963-127)
Reference Drawing 240272
302767
Subreflector Strut
3/8”
Flat Washer
(9997-145)
3/8”
Lock Washer
(9974-63)
3/8”
Hex Nut
(9999-60)
Figure 12
Step 2
Loosely attach 302768 Subreflector Ring Support Brackets to the Subreflector Struts as
shown in Figure 13. Note: Observe bracket positioning on the strut and ensure all brackets are orientated in the same manner.
3/8 x 2-1/4”
Hex Head
Capscrew
(9963-127)
Reference Drawing 240272
3/8”
Flat Washer
(9997-145)
3/8”
Flat Washer
(9997-145)
3/8”
Lock Washer
(9974-63)
302768
Subreflector
Ring Support
Bracket
3/8”
Hex Nut
(9999-60)
Figure 13
22
Installation Procedures