Download Sharp SF-461 Specifications

Transcript
KEY OPERATOR PROGRAMS
P90 Display the List of All P Codes
Program P90 is used to sequentially display all programs.
The programs in which the setting has been changed from the
factory default setting are indicated with ● .
When P90 is entered, the following message will appear.
If an optional Card Counter (SF-EA11) or Auditor (SF-EA12) is
installed, programs 10, 11, 13, 14, 16 and 18 will not be displayed.
P90: DISPLAY THE LIST OF ALL P CODES.
TO SCROLL DISPLAY: PRESS
KEY. TO
RUN AN INDICATED PROGRAM: PRESS START.
● P10:AUDITING MODE.
P11:NUMBER OF COPIES PER
ACCOUNT.
P13:RESETTING ACCOUNT.
P14:ACCOUNT NUMBER CONTROL.
P16:ACCOUNT LIMIT SETTING.
1.
Press the SCROLL DISPLAY key to advance through
the list of programs.
●
Each additional press of the SCROLL DISPLAY key will
advance the message display through the list of programs
starting with P10.
2.
To enter a program, highlight it and press the START
key.
3.
Press the PROGRAM key to exit the program.
Key operator programs
Downloaded From ManualsPrinter.com Manuals
97