Download Sharp SF-461 Specifications
Transcript
KEY OPERATOR PROGRAMS P90 Display the List of All P Codes Program P90 is used to sequentially display all programs. The programs in which the setting has been changed from the factory default setting are indicated with ● . When P90 is entered, the following message will appear. If an optional Card Counter (SF-EA11) or Auditor (SF-EA12) is installed, programs 10, 11, 13, 14, 16 and 18 will not be displayed. P90: DISPLAY THE LIST OF ALL P CODES. TO SCROLL DISPLAY: PRESS KEY. TO RUN AN INDICATED PROGRAM: PRESS START. ● P10:AUDITING MODE. P11:NUMBER OF COPIES PER ACCOUNT. P13:RESETTING ACCOUNT. P14:ACCOUNT NUMBER CONTROL. P16:ACCOUNT LIMIT SETTING. 1. Press the SCROLL DISPLAY key to advance through the list of programs. ● Each additional press of the SCROLL DISPLAY key will advance the message display through the list of programs starting with P10. 2. To enter a program, highlight it and press the START key. 3. Press the PROGRAM key to exit the program. Key operator programs Downloaded From ManualsPrinter.com Manuals 97