1
Download VDO MS 2000X - Technical data
Transcript
21 :MTESt Commands :MTESt:COUNt:FWAVeforms (see page 792) Query Syntax :MTESt:COUNt:FWAVeforms? [CHANnel<n>] <n> ::= 1 to (# analog channels) in NR1 format The :MTESt:COUNt:FWAVeforms? query returns the total number of failed waveforms in the current mask test run. This count is for all regions and all waveforms collected on the channel specified by the optional parameter or collected on the currently specified source channel (:MTESt:SOURce) if there is no parameter. Return Format <failed><NL> <failed> ::= number of failed waveforms in NR1 format. See Also Example Code 388 • "Introduction to :MTESt Commands" on page 379 • ":MTESt:COUNt:WAVeforms" on page 391 • ":MTESt:COUNt:TIME" on page 390 • ":MTESt:COUNt:RESet" on page 389 • ":MTESt:SOURce" on page 409 • "Example Code" on page 379 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
