Download Danfoss VLT 8000 AQUA Operating instructions

VLT® 5000 / VLT® 6000 HVAC / VLT® 8000 AQUA
IP20/NEMA 1 and Bookstyle
Carefully push in tabs at corners of LCP
cradle to release clips. Pull out to
disengage clips and lift cradle free.
7. Remove
LCP Cradle
•
8. Ribbon
Cable
Routing
• Route ribbon cables from LonWorks
memory card through slot at side of
control board cassette.
9. Insert
LonWorks
Card
• Insert edge of LonWorks cards into slot
in side of cassette and align screw
holes.
MG.60.N2.02 - VLT is a registered Danfoss trademark
15