Download Microsoft G7VP2 Specifications

Doc Number:
VIS-ANA-VER-01001-9002
Date:
27 May 2004
Issue:
5.0
Page:
2 of 80
Author:
J. Delgadillo
Change Record
Issue
Date
Section(s) Affected
1.0
2.0
2.0
2.0
2.0
08/08/03
08/20/03
08/20/03
08/20/03
08/20/03
2.0
2.0
2.0
3.0
08/20/03
08/20/03
08/20/03
08/28/03
All
Table 4.2.C
4.2.2.4
4.2, Table 4.2.2.2.B and C
Table 4.2.2.2.B and C,
Table 4.2.2.3.B
4.2.2.7 Table
3
4.2.1
4.2.2.1.9
3.0
08/28/03
4.2.2.1.13
3.0
08/28/03
4.2.2.9
3.0
08/28/03
4.2.2.2
3.0
3.0
08/30/03
08/30/03
4.2.2.2
Table 4.2.C
3.0
08/31/03
Table 4.2.C
3.0
08/31/03
4.3.2
3.0
08/31/03
3.0
09/15/03
3.0
09/15/03
Table 4.2.2.2.B and C,
Table 4.2.2.3.B
Table 4.2.2.2.B and C,
Table 4.2.2.3.B
4.2.2.2
3.0
09/15/03
4.2, 4.2.2.2, 4.2.2.3
3.0
09/15/03
4.2.2.2, 4.2.2.3, 4.2.2.6
3.0
09/16/03
4.2, 4.2.2.1, 4.2.2.9
3.0
4.0
5.0
5.0
5.0
5.0
09/17/03
03/17/04
05/27/04
05/27/04
05/27/04
05/27/04
Figure 4.2.A
ALL
Signature Block
4.2.1
Various
4.2.5.1 6
5.0
05/27/04
4.2
5.0
5.0
05/27/04
05/27/04
4.2.8 (new)
4.2.4.8, 4.2.5.14
Controls Preliminary Design Report Issue 5.doc
Description of Change/Change Request
Reference/Remarks
First Issue
Axis Limits, per RID No. TELS_PDR_29
Regeneration Cabinet, per RID No. TEL_PDR_24
AZ/ALT Initialisation, per RID No. TELS_PDR_40
PDU to LCU Interface, per RID No. TELS_PDR_51
Corrected power supply vendor and part number
Added AD10 reference
Revised LVD & EMC Table
Per TELS_PDR_79 RID, meaning of “disable” has been
clarified.
Per TELS_PDR_80 RID, LCU Mode section has been
amended.
Per TELS_PDR_38 RID, the PMU section has been
amended.
Per TELS_PDR_82 RID, correction to show that the Alt
rate feedback is the derivative of encoder feedback
Per TELS_PDR_105 RID, added Preload Scheme Plot
Per TELS_PDR_123 RID, AD03 calculations changed.
AD03 updated values are updated here.
Per TELS_PDR_104 RID, AD03 calculations changed.
AD03 updated values are updated here.
Per TELS_PDR_89 RID, the Altitude encoder-sitting
circumference updated.
Added Single Motor message per RID No.
TELS_PDR_88
PDU to LCU Interface, per RID No. TELS_PDR_51
Contractor’s comments
AZ Bearing Lube Pump description, per RID No.
TELS_PDR_22
Proposed LCU Interface change per RID No.
TELS_PDR_40
Deletion of Overspeed Detection Unit on AZ and CASS
axis (RID no. TELS_PDR_85 Contractor’s Updated
Response)
Per RID No. TELS_PDR_55, moving MCU and PMU
to an Appendix
Updated Figure 4.2.A
Extensive Revision to Include Final Design Changes
Per TELS_FDR1_038, modified signature block signees
Per TELS_FDR1_039, clarified “Activate” terminology
Per TELS_FDR1_040, re -organized doc
Per TELS_FDR1_041, added AD11 and corrected
wording for Anemometer interfaces
Per TELS_FDR1_043, reworded function of MCU &
PMU
Per TELS_FDR1_048, added para on break-out boxes
Per TELS_FDR1_087, added Intlk signal to list a nd