Download Maxtor 91190D7 Specifications

Transcript
INSTALLATION
System/Drive Information
The first time MaxBlast installation software is run, it will display information in a format similar to the System
Configuration Information table below. Subsequent executions start at the main menu and allow the user to
optionally display this information.
SYSTEM /D RIV E IN FO RM A TIO N
Maxtor Hard Disk Drive
M odel Number
S e r ia l N u m b e r
Computer System
Manufacturer
M odel
Processor (i.e., Pentium)
S p e e d (i.e ., 9 0 M H z )
Interface Card
Manufacturer
M odel
BIOS (CMOS/Setup)
Manufacturer
Version
D a te
Other Hard Disk Drive
Manufacturer
M odel
BIOS Setting: Cylinders
H e ad s
SPT
Other IDE Devices
Type (i.e., CD-ROM)
Manufacturer
M odel
The information in the System Configuration table must be completed for your records. This information will
be requested by the Maxtor Technical Assistance representative in the event that you call for assistance.
The Maxtor hard drive model number and serial number are also located on the top cover label of the hard
drive. System information should be available in the computer users’s manual or in the documentation for the
different devices attached to the system.
Once the information in this table is copied from the screen, continue with the installation or exit the
MaxBlast installation software as shown on the screen. EZMAX is a menu-driven program with on-line help to
guide you through the installation process.
4 – 24