Download Maxtor 91190D7 Specifications
Transcript
INSTALLATION System/Drive Information The first time MaxBlast installation software is run, it will display information in a format similar to the System Configuration Information table below. Subsequent executions start at the main menu and allow the user to optionally display this information. SYSTEM /D RIV E IN FO RM A TIO N Maxtor Hard Disk Drive M odel Number S e r ia l N u m b e r Computer System Manufacturer M odel Processor (i.e., Pentium) S p e e d (i.e ., 9 0 M H z ) Interface Card Manufacturer M odel BIOS (CMOS/Setup) Manufacturer Version D a te Other Hard Disk Drive Manufacturer M odel BIOS Setting: Cylinders H e ad s SPT Other IDE Devices Type (i.e., CD-ROM) Manufacturer M odel The information in the System Configuration table must be completed for your records. This information will be requested by the Maxtor Technical Assistance representative in the event that you call for assistance. The Maxtor hard drive model number and serial number are also located on the top cover label of the hard drive. System information should be available in the computer users’s manual or in the documentation for the different devices attached to the system. Once the information in this table is copied from the screen, continue with the installation or exit the MaxBlast installation software as shown on the screen. EZMAX is a menu-driven program with on-line help to guide you through the installation process. 4 – 24