Download Moog EXPD7C1-2 Product specifications

QPT-20
IC Series
QPT-20
IC
Series
Product Overview
The QPT-20 Series of pan and tilts are rugged and durable enough for virtually any environment, including port
surveillance and mobile vehicle vision systems. The QPT-20 can handle payloads from 8 – 20 lb-ft, and provides
tabletop and/or tilt axis load mounting for multiple sensor array applications. Digital Serial Integrated Control (IC)
units communicate via network interface or through a dedicated controller (e.g. UniCom®).
PRODUCT SPECIFICATIONS
Standard Configuration
Available Features
• ICM configurations – 8 lb-ft (tilt) lifting torque
• ICMS configurations – 20 lb-ft (tilt) lifting torque
• Digital Serial Integrated Control (IC) models
• Mounting platforms include plain formed tabletop
and tabletop with single tilt-axis connector
• Internal wire tabletop for pass-through or IC sensor
wiring on certain models
• Fixed, Inverted, or Mobile Installations
• Mil-Spec Connectors
• Aluminum housings and hardened steel gearing
for durability in harsh environments
• Marine configuration that meets IP-66 standard
• Connector (base): 32-Pin
• Connector (tilt axis): 26-Soc
Sensor Integration
• Multi-Spectrum cameras
• Thermal imagers
• IR and visible illuminators
• Laser range finders
• Communication antennas
SPECIFICATIONS
Part
Number
Rotation Speeds*
Pan
Tilt
Rotation Range
Pan
Tilt
Configuration
Load Mount/
Interface
Nominal Voltage
Vdc
Communication
Interface
Control
Protocol
Repeatability
Pan and Tilt
7-2200A
ICM
FT-A
12
Serial / IP
PTCR-20/Pelco D
1 - 14°/ sec.
1 - 5°/ sec.
435°(± 217.5°)
180°(± 90°)
0.25°
7-2200B
ICM
FT-B
12
Serial / IP
PTCR-20/Pelco D
1 - 14°/ sec.
1 - 5°/ sec.
435°(± 217.5°)
180°(± 90°)
0.25°
7-22HSA
ICM HS
FT-A
24
Serial / IP
PTCR-20/Pelco D
1 - 30°/ sec.
1 - 12°/ sec.
435°(± 217.5°)
180°(± 90°)
0.25°
7-22HSB
ICM HS
FT-B
24
Serial / IP
PTCR-20/Pelco D
1 - 30°/ sec.
1 - 12°/ sec.
435°(± 217.5°)
180°(± 90°)
0.25°
7-2300A
ICM CR
FT-A
12
Serial / IP
PTCR-20/Pelco D
1 - 14°/ sec.
1 - 5°/ sec.
Continuous
180°(± 90°)
0.25°
7-2300B
ICM CR
FT-B
12
Serial / IP
PTCR-20/Pelco D
1 - 14°/ sec.
1 - 5°/ sec.
Continuous
180°(± 90°)
0.25°
7-23HSA
ICM CR HS
FT-A
24
Serial / IP
PTCR-20/Pelco D
1 - 30°/ sec.
1 - 12°/ sec.
Continuous
180°(± 90°)
0.25°
7-23HSB
ICM CR HS
FT-B
24
Serial / IP
PTCR-20/Pelco D
1 - 30°/ sec.
1 - 12°/ sec.
Continuous
180°(± 90°)
0.25°
7-2500A
ICMS CR
FT-A
12
Serial / IP
PTCR-96/Pelco D
.005 - 25°/sec.
.005 - 4°/sec.
Continuous
180°(± 90°)
0.05°
7-2500B
ICMS CR
FT-B
12
Serial / IP
PTCR-96/Pelco D
.005 - 25°/sec.
.005 - 4°/sec.
Continuous
180°(± 90°)
0.05°
7-25HSA
ICMS CR HS
FT-A
24
Serial / IP
PTCR-96/Pelco D
.005 - 25°/sec.
.005 - 8°/sec.
Continuous
180°(± 90°)
0.05°
7-25HSB
ICMS CR HS
FT-B
24
Serial / IP
PTCR-96/Pelco D
.005 - 25°/sec.
.005 - 8°/sec.
Continuous
180°(± 90°)
0.05°
ICM - Marine / Brush Motor, ICMS - Marine Sentry (Stepper), CR - Continuous. Rotation, HS - High Speed
Serial: RS-232, RS-422, IP: Ethernet TCP/IP
FT – Formed Tabletop
* At stated load capacity and nominal voltage
Pan & Tilt Positioners
www.moogS3.com
31