Download WHITER - Singer

Mt..i..tUl1lLS
Your new White sewing machine comes equipped with the follow
ing set of acceories to
make your sewing easier.
Three Metal Bobbins
Buttonhole Foot
Th. bobbins are
made of m.ti end
hold about BOyvds
of thr.ad.
the for buttonhol
ing.
Needles
Button Sewing Foot
All-purpose nedl.
j
vided.
Two Felt Washers
:-
;E:.
Cording and Zipper Foot
Q
Quilting Guide
helps make parallel
rows of .tldiing.
for
Insert the plug with the inden
tations on the underside into
the socket on the right side of
the machine.
The plug will
only go in one way. Place the
foot control in such a position
that your foot rests comfort
ably on it. Insert the plug into
a wail outlet, 1lO—120V.
Your machine is grounded as a
safety feature provided on
White Sewing Machines,*
When not in use, keep the plug
disconnected from machine.
stitching very
• cord or zipper.
ATTACHING
SION PLATE
Screw Drivers
To change to flat sewing
surface, place extension plate
as follows.
do.. to the dge of
niell one for UI.
on belbln tension.
largi one for use on
thumb scrw n..di,
cI.np screw, etc.
1.
2.
3.
Cloth Guide and Screw
Tubed Oiler
alde in sewing
strdit e.n1.
for usa in oiling the
macbin.. Sos page
38.
4.
Straiit Stitch Foot and Plate
for ItNll
sawing
0
I
I
hold button in puce
for stitching.
six.. 11, 14 and 18
we induded. Twin
M(C I. elsa pro
Pi 1. f.it
ELECTRICAL CONNEC
TIONS
EXTEN
Turn down the extension
plate support legs (A) with
the left hand.
Pull the lock lever (B) and
turn it up to the left.
Tilt the extension plate
down to enter the pin (C)
in the corresponding hole
ID) at the rear side free
arm.
Turn the lever (8) down to
the right to set the pin
into front hole (El.
Note:
In case of sewing
tubular areas, detach
the extension plate
for free arm sewing.
*
only.
1
on dtsor and very
ilolit bWi)t milan.
ale wfsrl extra
support is needed.
6
U.S.A
‘5
:
“