Download Wolf L582212 Specifications

INSTALLATION
Step 2: Wall Preparation
7 1/2"
16 3/4"
WARNING
Framing must be structurally
tied together and tied to ceiling joists to provide enough
strength to support the
weight of the hood liner and
the internal blower, if applicable.
8" ROUND
CL
3 1/4"
7 1/16"
*
31/4"
*
16 5/8"
11/16"
IMPORTANT NOTE: Do not use duct
smaller than 8" round.
IMPORTANT NOTE: Wolf recommends that the hood liner be
installed a minimum of 30" and a
maximum of 36" above the cooking
surface.
1 3/16"
CL
* DIMENSION IS 2"
Mounting for Model L282212
1) Construct wood wall framing that
is flush with the interior surface of the
wall studs. Make certain that the
framing is centered over the desired
installation location.
91/2"
21 1/4"
2) Use the rough-in plate shipped
with the liner to determine framing
location.
3) After wall surface is finished,
secure the rough-in plate to the wall
surface.
NOTE: If additional mounting holes
are required for adequate liner
support, drill additional mounting
holes in rough-in plate and use these
holes to attach liner assembly to wall
framing.
161/2"
*
31/4"
CL
10" ROUND
8 1/2"
*
51/2"
* *
22 3/8"
10 13/16"
1"
*
*
61/2"
51/2"
*
*
CL
* DIMENSION IS 2"
*
61/2"
Mounting for Models L342212, L402212, L462212,
L522212 and L582212
7