Download Brigade CFDSB Installation guide

HeadlineInformation (with Flush Mount Trim)
Cabinet
Flush Mount Installation with Standard Cabinets
1/4”
(0.25 cm)
Offset in Finished Wall
Finished
Wall
1-3/4”
(4.4 cm)
23-7/8”
(60.6 cm)
24”
(61.0 cm)
26-1/2”
(67.3 cm)
24-5/8”
(62.5 cm)
24-3/4”
(62.9 cm)
26-1/4”
(66.7 cm)
Face of
cabinet
frame
Flush
Side trim
3/4”
(.6 cm)
Face of
door/drawer
*
*The face of the door skin needs to be on the same plane, flush with the cabinets.
If the door face is pushed in past the surface of the cabinet, the door could run into
cabinetry when it is in the full open position.
The hinge stop needs to be placed at 90 or 110 degrees.
Flush Mount Installation with Custom Cabinets
1/8”
(0.3 cm)
Finished
Wall
23-7/8”
(60.6 cm)
24-5/8”
(62.5 cm)
25-5/8”
(65.1 cm)
26-1/2”
(67.3 cm)
26-3/8”
(67.0 cm)
26-1/4”
(66.7 cm)
Flush
Side trim
Face of
cabinet
frame
1/2” (1.3 cm)
Face of
stainless steel door
*
Face of
door/drawer
*The face of the door skin needs to be on the same plane, flush with the cabinets.
If the door face is pushed in past the surface of the cabinet, the door could run into
cabinetry when it is in the full open position.
The hinge stop needs to be placed at 90 or 110 degrees.
15
3/4”
(.6 cm)