Download Windsor COMDUX Operating instructions

Operations
Machine Operation
Emergency Stop Procedures
Pre-Run Machine Inspection
Do a pre-run inspection to find possible problems that
could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid
missing steps.
NOTE: See maintenance section for pre-run machine
inspection checklist items.
Starting Machine
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all safety devices are in place and operating
properly.
1. Release both the throttle switches.
2. Turn machine power off with key switch by turning
key switch counterclockwise to the "o" (off)
position.
Deluxe
1. Release both the throttle switches.
2. Turn machine power off with key switch by turning
key switch counterclockwise to the "o" (off)
position.
3. Push E-Stop button in.
4. To reset the E-stop button, rotate counter
clockwise and the switch will pop back out
1. Turn the machine power on by turning key switch
clockwise to the "I" (on) position.
2. Check the position of the Direction Control Button
to make sure the machine will travel in the direction
intended.
3. Check the position of the speed control knob to
make sure the machine will travel at the intended
speed.
4. Press either throttle switch.
86400200 Operators Manual - Commodore Duo
21