Download Siemens ST60 User guide

ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Closed user group
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_closedusergroup.fm
Closed user
group
CMCall register
MClosed user group
M Select function.
Depending on service provider, L
you can create groups with this
service. These can have access to
internal (company) information, for
example, or special tariffs apply.
Please check with your service provider for details.
Closed user group
Activate/deactivate function. Closed
user group must be deactivated for
normal phone use (phone code,
p. 13).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
63
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configuration).