Download Viessmann WB2B Installation guide
Transcript
Safety, Installation and Warranty Requirements Safety, Installation and Warranty Requirements Please ensure that these instructions are read and understood before commencing installation. Failure to comply with the instructions listed below and details printed in this manual can cause product/property damage, severe personal injury, and/or loss of life. Ensure all requirements below are understood and fulfilled (including detailed information found in manual subsections). H Licensed professional heating contractor The installation, service, and maintenance of this equipment must be performed by a licensed professional heating contractor. Please see section entitled “Important Regulatory and Installation Requirements” in the Installation Instructions. " H Product documentation Read all applicable documentation before commencing installation. Store documentation near boiler in a readily accessible location for reference in the future by service personnel. For a listing of applicable literature, please see section entitled “Important Regulatory and Installation Requirements” in the Installation Instructions. H Carbon monoxide Improper installation, service and/or maintenance can cause flue products to flow into living space. Flue products contain poisonous carbon monoxide gas. For information pertaining to the proper installation, service and maintenance of this equipment to avoid formation of carbon monoxide, please read these Installation Instructions carefully. H Equipment venting Never operate boiler without an installed venting system. An improper venting system can cause carbon monoxide poisoning. " H Warranty Information contained in this and related product documentation must be read and followed. Failure to do so renders warranty null and void. WARNING Installers must follow local regulations with respect to installation of carbon monoxide detectors. Follow manufacturer’s maintenance schedule of boiler. " H Advice to owner Once the installation work is complete, the heating contractor must familiarize the system operator/ultimate owner with all equipment, as well as safety precautions/requirements, shut-down procedure, and the need for professional service annually before the heating season begins. How these Installation Instructions are structured... These Instructions cover the following venting systems for the Vitodens 100-W boiler. Refer to the section applicable to your application for pertinent installation information. Before proceeding with the installation, please read sections entitled Safety and General Information. These sections are applicable to all venting systems listed and must be read before commencing the installation. Information specific to... H Vertical Vent Installations (Coaxial) is found in the Vertical Vent Installation Section starting on page 24. H Direct Vent Installations (Two-pipe System) is found in the Direct Vent Section starting on page 40. H Single Wall Vent Installations (Room Air Dependent) is found in the Single Wall Venting Section starting on page 64. 2 5368 815 v2.0 b H Side Wall Vent Installations (Coaxial) is found in the Side Wall Vent Installation Section starting on page 13.