Download DutchWest 2468 Operating instructions

Dutchwest Natural Vent Gas Heater
Operation
Your First Fire
Read these instructions carefully and familiarize yourself with the burner controls. Locate the pilot assembly,
Figure 25. Follow the lighting instructions on Page 14
exactly.
During the first fire, it is not unusual to smell some
odor associated with new logs, paint and metal being
heated. Odors should dissipate within an hour or so,
however, you can open a window to provide fresh air to
alleviate the condition.
Pilot and Burner Inspection
Each time you light your heater check that the pilot
flame and burner flame patterns are as shown in Figures 26 and 27. If flame patterns are incorrect, turn the
heater off. Contact your dealer or a qualified gas technician for assistance. Do not operate the heater until the
pilot flame is correct.
Follow regular maintenance procedures as described
on Page 19.
CO105c
Fig. 26 Correct pilot flame pattern.
CO105c
Pilot flame
4/10/00 djt
Red Glow
LG143
Fig. 27 Correct burner flame pattern.
Pilot Assembly
ST769
Fig. 25 Pilot Assembly location.
ST769
Dutchwest
pilot location
5/15/03 djt
30002008
LG142
Stardance
Install logs 2
12/11/00 djt
13