1
Download Agilent Technologies InfiniiVision 5000 Series Technical data
Transcript
5
Commands by Subsystem
:MEASure:XMAX
(see page 750)
Command Syntax
:MEASure:XMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MEASure:XMAX command installs a screen measurement and starts
an X- at- Max- Y measurement on the selected window. If the optional
source parameter is specified, the current source is modified.
NOTE
Query Syntax
:MEASure:XMAX is an alias for :MEASure:TMAX.
:MEASure:XMAX? [<source>]
The :MEASure:XMAX? query measures and returns the horizontal axis
value at which the maximum vertical value occurs. If the optional source
is specified, the current source is modified. If all channels are off, the
query returns 9.9E+37.
Return Format
<value><NL>
<value> ::= horizontal value of the maximum in NR3 format
See Also
• "Introduction to :MEASure Commands" on page 290
• ":MEASure:XMIN" on page 336
• ":MEASure:TMAX" on page 683
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
335
