Download Denon AVR 1907 - AV Receiver Operating instructions

ENGLISH
Easy Setup Procedure
Check the parameter
Connecting Other Sources
• The results of the measured items can be checked.
• This item is displayed, after the measurement result of the “Auto
Setup” is decided.
1
Press D H to select “Parameter Check”, then press
ENTER.
2 Press D H to select the item, then press ENTER.
3 Press ENTER.
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
Audio cable
A
Video cable
F
Analog connections (Stereo)
(White)
L
L
(Red)
R
R
B
2
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
Pin-plug cable
1
Video connections
G
S-Video connections
Analog connections (Monaural, for subwoofer)
S-Video cable
Pin-plug cable
C
H
Component video connections
Digital connections (Coaxial)
(Y)
(Green)
h
(Orange)
(Press ENTER.)
Coaxial cable (75 Ω/ohms pin-plug cable)
D
(Blue)
(PB/CB)
(Red)
(PR/CR)
Component video cable
Digital connections (Optical)
Signal direction
Optical fiber cable
Example: Speaker Configuration Check
• To reset:
Press D H to select “Restore” at the “Parameter Check” screen,
then press F.
Audio signal
E
Speaker connections
IN
OUT
OUT
IN
IN
OUT
OUT
IN
Video signal
Speaker cable
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
13
ENGLISH