Download Sharp XV-Z100 Specifications

4. Turn the video equipment on and start playback
5. Select the INPUT mode
Select the “INPUT 3” using the INPUT button on the projector or D INPUT 3 on the remote
control.
On the On the remote
On-screen display
projector
control
S
• When pressing the INPUT button on the projector, input mode switches in the following
order: INPUT1 INPUT2 INPUT3 INPUT4
• When using the remote control, press the CINPUT 1/CINPUT 2/DINPUT 3/EINPUT
4 button to switch the INPUT mode.
_P. 30
Quick Start
INPUT 3
6. Adjust the focus, image size, and projector angle
1. Adjust the focus by
turning the focus ring.
2. Adjust the projection
image size by turning
the zoom ring.
Zoom ring
3. Adjust the projector
angle using the HEIGHT
ADJUST lever.
_PP. 30, 31
Focus ring
7. Correct trapezoidal distortion
Correcting trapezoidal distortion using the Keystone Correction.
On the projector
Shrinks
upper side.
Shrinks
lower side.
On the remote control
_P. 33
8. Turn the Power off
Press the STANDBY/ON button on the projector or the STANDBY button on the remote control,
and then press the button again while the confirmation message is displayed, to put the projector
into standby mode.
On the On the remote
control
projector
On-screen Display
• Unplug the power cord from the AC outlet after the cooling fan stops.
Downloaded From projector-manual.com Sharp Manuals
_P. 29
17