Download Pro-Max CG10 Operating instructions

-2-
Table of content
1
Electrical standards
3
2
Safety instructions
3
3
Warranty
4
Used terms and signal indications
4
5
Introduction
5
6
Application
5
6.1
(Figures 1 & 2 ) Functional diagram, sample tpath details
6
7.
Working principle of the conversion
7
.4
7.1
Selection of the appropriate catalyst temperature ............................................................................. 7
8.
Technical data table
9.
Description
8
9
10.
Receipt and storage of goods
10
11.
Installation instructions
11
12.
Supply connections
11
12.1
Hose/tube connections ..................................................................................................................... 12
12.2
Electrical connections .................................................................................................................... 12
13.
Initial use
13
14.
Taking the converter out of operation
13
15.
Determining the catalyst service life
14
15.1.
Figures 4-6, Catalyst life as a funtion of concentrations
14-15
16.1
Replacing the catalyst cartridge ..................................................................................................... 16
16.2
Replacing the O-ring seals .............................................................................................................. 17
16.3
Checking for gas tightness .............................................................................................................. 18
17.
Troubleshooting
18
Appendix ......................................................................................................................................... 20
19
App 1 Electrical Diagram ....................................................................................................................... 21
App 2 PID temperature controller program and settings ..................................................................... 22
This instruction manual is subject to technical modifications. It is the operators responsibility to insure proper training, safety and operating
precautions are observed when using electrical gas analysis equipment. ©11/2000 M&C Products Analysentechnik GmbH. Reproduction of
this document is not allowed without permission from M&C CG® is a registered trade mark.
.
M&C Products Analysis Technology
9-2.0-MEUS