1
Download Maxon WL7-vers. C Operator`s manual
Transcript
ADJUSTMENT SCREW THRESHOLD PLATE THRESHOLD WARNING BEACON THRESHOLD WARNING ALARM ADJUSTING SWITCH FIG. 63-1B RH SIDE OF LIFT FIG. 63-1A CW - UNTIL ALARM & BEACONS TURN ON 1/4-TURN CCW - ALARM & BEACONS TURN OFF THRESHOLD SWITCH ADJUSTMENT SCREWS FIG. 63-2 63 PATENTS PENDING 11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713 7. Turn the adjustment screw clockwise on right side of threshold plate (FIG. 63-1B), until threshold warning alarm and beacon lights are turned on (FIG. 63-1A). Next, turn adjustment screws counter-clockwise until threshold warning alarm and beacon lights are turned off. Then, turn adjustment screw approximately 1/4-turn counter-clockwise (FIG. 63-2).
