Download Simplicity TP 100-200 Technical information
Transcript
Caption * K51 K87 Q SD TI TI/L1 TI/L2 TI/L3 TI/N YO1 YO2 = Diagram figure number = See the note indicated by the letter = Microprocessor-based release: – overcurrent release type Ekip LS/I, Ekip N-LS/I, Ekip LSI, Ekip LSIG, Ekip E-LSIG – motor protection release type Ekip I, Ekip M-I, Ekip M-LIU, Ekip M-LRIU – generator protection release type Ekip G-LSI = Residual current release type RC Inst, RC Sel, RC Sel 200, RC B Type = Main circuit-breaker = Power supply switch-disconnector of the residual current release type RC Inst, RC Sel, RC Sel 200 or RC B Type = Toroidal current transformer = Current transformer placed on phase L1 = Current transformer placed on phase L2 = Current transformer placed on phase L3 = Current transformer placed on the neutral = Opening solenoid of the microprocessor-based overcurrent release = Opening solenoid of the residual current release 6/7 1SDC210033D0202
Related documents