Download Weed Eater 532 43 32-03 Product specifications

TROUBLESHOOTING
CHART:
PROBLEM
CAUSE
,,,,,,,,
Will not start
1
Out of fiJel,
1
Fill fuel tank.
2
3
Bad spark plug,
Dirty air filter.
2
3
Replace spark plug.
Clean/replace air filter.
4
Water in fuel.
4
Empty fuel tank and carburetor,
refill tank with fresh gasoline and
replace fuel filter.
5
Check all wiring.
Loose or damaged
6
Engine valves out of adjustment.
6
Contact a qualified service center
1
Dirty airfitter.
1
Clearqreplace
2.
Bad spark plug.
2
Replace spark plug.
Weak or dead battery.
3
Recharge or replace battery.
4
Empty fuel tank and refill tank
with fresh, clean gasoline,
5
6
Check all wiring,
Contact a qualified service center,
4
Engine clicks
will not start
but
Loss of power
Loose or damaged wiring.
Engine valves out of adjustment.
1
Clutch/brake pedal noi depressed,
1
Depress clut'ch!brake pedai.
2
Deck clutch is engaged,
2
Disengage
3
4
Weak or dead battery.
Blown fuse.
3 , Recharge or replace
4 RepJace fuse.
5
Corroded battery terminals.
5
Ciean battery terminals.
6
Loose or damaged widng,
6
Check all wiring.
7
8
Faulty ignition switch,
Faulty solenoid or starter.
7
8
Checl<,lreplace ignition switch,
Check/replace solenoid or starter.
9
Faultyoperatorpresenceswitch{es).
9
Contact a qualified service center,
1 Weak
ordead
ba ,ry.
deck clutch.
battery,
.....
i Recharge
orrepSase
battery.
2
Corroded battery terminals;
2
Clean battery terminals.
3
Loose or damaged wiring,
3
Check all wiring,
4
Faulty solenoid or starter.
4
Check/replace
1
2
'Cutting too much grass/too fast.
Build-up of grass, leaves and trasl"
under mower,
1
2
Raise cutting height/reduce
Clean underside of mower
housing.
3
Clean/replace
4
vibration
' Stale or dirty fueL
air filter.
5
6
3
Excessive
wiring,
"
5
3
Engi'ne will not
turn over
CORRECTION
Dirty air filter.
_Low oil level/dirty
oil
5
6
Faulty spark plug.
Stale or dirty fuel.
7
Water in fuel.
8
Spark plug wire loose.
solenoid or starter.
speed.
air filter,
4
Check oit level/change
5
6
Clean&regaporchangesparkplug
Empty fuel tank and refill tank
wth fresh, clean gasoline.
Empty fuel tank and carburetor,
refill tank with fresh gasoline.
7
8
oil.
Connect & tighten spark plug wire
9
10
Dirty engine air screen/fins.
Dirty/clogged muffler.
9
10
Clean engine air screen/fins.
Clean!repface muffler,
11
Loose or damaged wiring.
11
Check atl wiring.
12
Engine valves out of adjustment.
12
Contact a qualified service center.
1
Worn, bent or loose blade,
1
Replace blade, Tighten blade
bolt.
2
Bent blade mandrel.
2
Contact
3
Loose/damaged part(s).
3
Tighten loose
Replace
damaged
part(s),
parts,
25
a qualified service center,