Download Uniwide Technologies XtremeServer 1322 User`s guide

Transcript
1.6 Replacing the Interface Unit
1.6.1 Interface Board(IFB) Unit and Backplane Unit
CAUTION
Before installing IFB, remove HDD carrier and locate FDD forward.
① Secure the backplane board on the backplane bracket with two screws
and the interface board on the interface bracket with three screws.
② Assemble the interface board unit into the backplane board unit.
③ Install the interface unit into the chassis.
④ Install the cable for FDD, front LED panel and CD-ROM drive.
CD-ROM Cable
FDD Cable
LED Panel Cable
89