Download Sharp R-95STM Specifications

Computer-controlled functions
fig. 7: Side view of the LPKF
ProtoMat 95s/II
1
2
7
3
4
5
8
1- Plotter head
2- Hood limit switch connection
3- 6 bar port for connecting the hood
compressed air distributor
4- Port for connecting the pneumatic system
unit
6
5- Pneumatic system unit
6- Vacuum connection
7- X-axis motor
8- Compressed air inlet (6 mm) from the
DispoMat (LPKF AutoContac, optional)
4.5 The hood and pneumatic port
The LPKF ProtoMat 95s/II is normally supplied with the hood preassembled. More detailed information on the hood can be obtained from
the relevant assembly instructions.
Danger! Close the flap by the handle only as there is a risk of
fingers being crushed at the sides of the flap.
Secure the flap when open in the catches provided for this
purpose.
ProtoMat 95s/II
21