Download BT 1050 Technical information

10.7 Input technical data
Switch box
Maximum voltage
Maximum current
32 Vdc (no load, open circuit)
3 mAdc (short circuit)
Lockout (link)
Maximum voltage
Maximum pulldown voltage
Maximum current
32 Vdc (no load, open circuit)
0.25 Vdc
1.5 mAdc
ve
10.8 Output technical data
Relay(s)
ac motor load
A
rc
Pilot duty load
Electrical life (operations)
Mechanical life (operations)
RS485
2 x single pole changeover relays (SPCO)
250 Vac
3 amp @ 250 Vac
1 amp @ 250 Vac
¼ HP (2.9 amp) @ 250 Vac
1
/10 HP (3 amp) @ 120 Vac
C300 (2.5 amp) - control circuit/coils
3 x 105 or greater depending on load
30 x 106
hi
Contacts
Voltage ratings (maximum)
Resistive load
Inductive load
Physical layer
Protocol
Isolation
Receiver unit load
Output rate
RS485 4-wire full or 2-wire half duplex
Modbus RTU format
60 Vac/dc
(256 devices - maximum)
Up to 10 frames / second
10.9 Infrared
Physical layer
IrDA
Baud
Range
Working angle
38400
10 cm
15°
Exempt from EN 60825-12: 2007 Safety of laser
products- does not exceed the accessible emission
limits (AEL) of class 1
Eye safety information
42
IM-P405-39 AB Issue 1