Download Pyro Industries Advantage Plus Operating instructions

Pre-Installation Assembly
1. After removing the packaging from the stove, lift the hopper lid, and remove all pre-packaged items that
were shipped in the hopper. Also open the stove door and remove all pre-packaged items.
2. Using a 7/16”socket or open end wrench, remove the two bolts from the bottom that secure the stove
to the wooden pallet.
3. If your stove is a freestanding model, remove the pedestal from its box and place it beside the stove.
With a helper, lift the stove onto its pedestal base. Put the six 1/4” bolts through the holes in the mounting
flange of the pedestal and into the six threaded inserts in the stove bottom. Two of these are where the
stove was originally secured to the pallet. Tighten all six fasteners with a properly sized wrench or socket
(3/8”).
1
6
2
5
3
Remove The Two Bolts From
Under The Pallet
Pedestal/Ash Pan Assembly
4
Attach Stove To Pedestal
By Inserting Six Bolts
After stove body is secured to
pedestal install the sidepanel
attachment screws. Find 2 #8
screws in a small bag in the
accessory kit. Using a Phillips
screw driver install screw from
underneath the side panel at
the front edge.