Download Roland R-1000 Technical data

Manual
Double Sheet Detector R1000 series E20
B0046991 / Rev. 1.6
Electrical installation
5.2.2
Allocation of connectors at the E20-4P
RS232
Power
PG9
SPS / PLC
PG16
Sensor 1
Sensor 2
PG11 EMV PG11 EMV
Sensor 3 Sensor 4
PG11 EMV PG11 EMV
Fig. 31: Allocation of connectors at the E20-4P
Pos : 40 /D oppel blech/Geräte/E20/5 Elektrisc he Installati on/Ansc hlus s an Betriebs erde @ 1\mod_1192713625531_501.doc @ 5096 @ 2 @ 1
5.3
Connection to the grounding of the machine
The enclosure of the R1000 has an M6 threaded screw as grounding connection. This screw must
be connected to the earth ground of the equipment with a copper wire gauge of at least 1.5 mm²
cross section.
Attention
The positive supply voltage +24 VDC should not be connected to
machine ground.
Pos : 41 /D oppel blech/Geräte/E20/5 Elektrisc he Installati on/Verdr ahtungspl äne und Kl emmenbeleg ung @ 1\mod_1192448670343_501.doc @ 4820 @ 2333333 @ 1
64
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33