Download Quantum Data 822S Specifications

5102ch01.fm
Draft Document for Review May 12, 2014 12:46 pm
򐂰 The vertical distance between the mounting holes must consist of sets of three holes
spaced (from bottom to top) 15.9 mm (0.625 in.), 15.9 mm (0.625 in.), and 12.67 mm
(0.5 in.) on-center, making each three-hole set of vertical hole spacing 44.45 mm (1.75 in.)
apart on center. Rail-mounting holes must be 7.1 mm ± 0.1 mm (0.28 in. ± 0.004 in.) in
diameter. Figure 1-8 shows the top front specification dimensions.
Top Front of Rack
Top Front of Rack
EIA Hole Spacing
6.75mm min
Hole Diameter =
7.1 +/- 0.1mm
15.9mm
15.9mm
15.9mm
15.9mm
12.7mm
12.7mm
15.9mm
15.9mm
15.9mm
15.9mm
12.7mm
12.7mm
450 +/- 0.75mm
Rack Front Opening
465 +/- 0.8mm
Rack Mounting Holes Center-to-Center
Figure 1-8 Rack specification dimensions, top front view
22
6.75mm min
IBM Power System S822 Technical Overview and Introduction