Download Sharp XE-A307 User manual

Getting Started
Initializing the Cash Register
For your register to operate properly, you must
initialize it before programming for the first time.
Follow this procedure.
1.Remove the register from its packing carton.
2.Insert the plug into the AC outlet.
IMPORTANT: This operation must be performed
without batteries loaded.
Never install the batteries into the register before
initializing it. Before you start operating the register,
you must first initialize it, then install two new alkaline
batteries LR6 (“AA” size) on the register. Otherwise,
distorted memory contents and malfunction of the
register will occur.
Language Selection
1.Display the “Language Selection” after turning
on the power.
2.Press the numeric key for the number of your
language.
After selecting the language, the register is initialized.
According to the displayed instruction, perform the
setting.
Setting the Date and Time
1.Display the “DATE/TIME setting”.
2.Enter the date in 6 digits. For example, enter
“050611” for June 5, 2011.
3.Press the key to select the time setting.
4.Enter the time in 4 digits. For example, enter
“1430” for 2:30pm.
5.Press the A key to set the date and time.
Setting the Tax Rate
1.Select the tax number (1 to 4) to set the tax rate.
2.Enter the tax rate in 7 digits (leading zeros may
be omitted). For example, press the “7” key to
set 7%.
3.To set the second and later tax rates, press the
I key.
4.Press the A key to set the tax rate.
For details, refer to “FULL DETAILED INSTRUCTION
MANUAL”.
Setting the Mode Pass Code
Installing Batteries
1.Select the mode to set the pass code using
the F or I keys.
2.Enter the code in 4 digits using the numeric
keys.
3.Press the A key to set the mode pass code.
If no pass code is set, press the A key.
Batteries must be installed in the cash register
to prevent data and programmed contents from
being lost from the memory in case of accidental
disconnection of the AC cord or power failure. Please
install two new alkaline batteries LR6 (“AA” size)
before programming and operating the cash register.
Setting the Manager Pass Code
1.Remove the printer cover.
1.Enter the code in 4 digits using the numeric
keys.
2.Press the A key to set the manager pass
code.
If no pass code is set, press the A key.
Setting the Receipt Logo
1.To change the default logo text, press the D
key to delete the texts in each line.
Enter the text using the character keys to
print on the receipt.
2.Press the A key to set the receipt logo.
If you do not change receipt logo, press the A key.
2.Open the battery cover next to the paper roll
cradle.
Text entry method
There are two ways for programming text; using
character keys on the keyboard or entering
character codes with numeric keys on the keyboard.
You can enter characters according to the small
figures printed in the lower position of the numeric
keys. For the layout, please refer to “keyboard
Layout”.
For example to enter “A”, press the 8 key. To enter
“B”, press the 8 key twice.
D
4.Feed the end of the paper along with the paper
positioning guides as per the diagram.
5.While holding down the paper, slowly close
the print roller arm of the receipt side, and
push down the arm until you hear a click
locking the arm.
• For details of the receipt logo, refer
to “FULL DETAILED INSTRUCTION
MANUAL”.
• The HELP function instructs you how to
set the logo message. After entering “13”,
press the HELP key to access the HELP.
3.Install two new LR6 (“AA” size) batteries.
Paper positioning
guides
4.Close the battery cover.
5.Replace the printer cover.
VAT is included in the entered price, and the tax
amount is calculated when tendered according to the
VAT rate programmed.
By default, VAT1 is assigned to all items.
Installing Paper Rolls
Entries
Department Entries
Basic Sales Entry
2.Enter the unit price and press the appropriate
department key.
For details, refer to the item below.
3.Repeat step 2 for all department items.
4.When the item entry is completed, press the
z key. The total amount due is displayed.
5.Receive the amount from your customer, and
enter the amount by the numeric keys.
6.Press the A key. The change due is
displayed, and the drawer is opened.
Key operation example
Clerk assignment
Item entries
Displaying subtotal
Amount tendered
Finalizing the transaction
* ! " : indicate department keys.
The register provides a maximum of 99 departments for a merchandise classification. Group attributes, such as
taxable status, are applied to items when they are entered to the departments.
A) For the department 1 to 20, enter the unit price and press the department key. If you use the programmed unit
price, press the department key only.
B) For department 21 to 40, enter the unit price, press the d key and press the department key. If you use the
programmed unit price, press the d key and press the department key.
When using a programmed unit price
Unit price (max. 8 digits)
Department key
d
C) For department 41 and above, enter the department code using the numeric keys and press the d key, then
enter the unit price and press the A key.
If you use the programmed unit price, enter the department code and press the d key.
When using a programmed unit price
Dept. code
(1 to 99)
d
Unit price (max. 8 digits)
A
(In case only preset price entry is allowed.)
PLU (Price Look Up) Entries
7.Close the drawer.
1L
1500 !*
2300 "*
z
4000
A
D
If the print roller arm is not securely locked,
printing is not done right. If this problem
occurs, open the arm, and close the arm
instructed above.
The register can print receipts and journals. For the
printer, you must install the paper rolls (receipt and
journal paper rolls) provided with the register.
The HELP function instructs you how to assign VAT to
department. After pressing the “7” key, press the HELP
key to access the HELP.
1.Enter the clerk code and press the L key.
By default, the clerk 1 is signed on.
Print roller arm
3.Set a paper roll in the paper roll cradle of the
receipt side as per the diagram.
Calculation of VAT rate
Listed below is a basic sales entry example when
selling items by cash. For details, refer to “FULL
DETAILED INSTRUCTUION MANUAL”.
1.Remove the printer cover.
2.Lift up the print roller arm of the receipt side.
PLU Code Entry (max. 5 digits)
Enter the PLU code using the numeric keys, and press the
"71" and press the
key for "PLU 00071".
key. For example, enter
EAN Entries
Create EAN8/13-Codes in REG mode
This is the easiest way to register and to store EAN Codes before you open your shop or to work for the first time
with the cash register.
1.Scan the EAN Code
2.Enter the price of the article and press after the price entry the A key.
3.Enter the Department code to which the article should be assigned to and press after the Department
entry the A key.
4.Select “2. NO DELETE” with the I key in order to store the article continuously and press the A key.
5.The created article is now registered.
At the next scan entry of this EAN code the registration is automatically done without the steps above
steps 1 – 4.
EAN codes Entry (8 or 13 digits)
Enter the EAN code using the numeric keys, and press the
key.
EAN Code Scanning (8 or 13 digits)
Read the EAN code on the item with the scanner.
Error Warning
In the following examples, your register will go into an error state accompanied with a warning beep and the error message on the display.
Clear the error state by pressing the L key and then take the proper action to remedy the problem.
- When you exceed a 32-digit number (entry limit overflow):
Cancel the entry and re-enter a correct number.
- When you make an error in key operation:
Clear the error and try the entry again.
- When you make an entry beyond a programmable amount entry limit:
Check to see if the entered amount is correct. If it is correct, it can be rung up in the MGR mode. Contact your manager.
- When an including-tax subtotal exceeds eight digits:
Clear the error message by pressing the L key and then press a media key to finalize the transaction.
Correction
Correction of Entered Number
When you enter an incorrect number, delete it by
pressing the L key immediately after the entry.
Correction of the Last Entry
If you make a mistake when making a department
entry, PLU entry, percentage (0 and %2) and
discount (J), you can correct this entry by pressing
the ~ key immediately.
Correction of Earlier Entries
You can correct any incorrect entry made during
a transaction if you find it before finalizing the
transaction by pressing the A key.
Move the cursor to the item to be voided and press
the ~ key.
Subtotal Void
You can void an entry transaction. Once subtotal
void is executed, the transaction is aborted and the
register issues an receipt.
Press the ~ key immediately after pressing the z
key.
And then press the z key again.
Correction after Finalizing a
Transaction
When you need to void incorrect entries that are
found after finalizing a transaction or cannot be
corrected by direct, indirect or subtotal void, the
following steps should be taken.
1.Select the VOID mode in the mode selection
window.
2.Repeat the entries that are recorded on an
incorrect receipt.