Download Sharp AR-M162 Specifications

Pegasus-E_Copy_Ex.book
60 ページ
２００４年９月２３日　木曜日　午前１１時４１分
COPY FUNCTIONS
ONE-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
1
2
TO
GE
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
Press the [2-SIDED COPY] key.
OUTPUT
2-SIDED
COPY
SPECIAL FUNCTI
MAT
ORIGINAL SIZE DUPLEX SCAN
CAST
COPY MODE
1 to 1
1 to 2
2 to 2
4
If you wish to have the orientation of
the back image be opposite the
orientation of the front image, set
"BINDING CHANGE" to "ON" with the
[ ] or [ ] key.
COPY MODE
1 to 2
2 to 2
2 to 1
BINDING CHANGE ON
If the copies are to be bound at the top, reversing the
orientations of the front and back images will result in a
uniform orientation when the bound copies are viewed (note
that this may depend on the orientation of the originals).
5
Press the [OK] key.
BACK
The duplex mode selection
screen appears.
You will return to the base
screen.
OK
GHI
3
Select "2 to 1" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
COPY MODE
1 to 2
2 to 2
2 to 1
BINDING CHANGE OFF
6
Set the number of copies and press
the [START] key ( ).
WXYZ
Note
To stop copying in the middle of
a run, press the [C] key.
Do not touch an original (A) that is on the
reversing tray. Doing so may cause a misfeed.
(A)
60