1
Download Chelsio Communications Chelsio T5 User`s guide
Transcript
Chapter IV. iWARP (RDMA) viii. Register OpenMPi with MPI-selector: [root@host]# mpi-selector --register openmpi --source-dir /usr/mpi/gcc/openmpi-x.y.z/bin ix. Verify if it is listed in mpi-selector: [root@host]# mpi-selector --l x. Set OpenMPI: [root@host]# mpi-selector --set openmpi –yes xi. Logut and log back in. MVAPICH2 (Installation and Setup) i. Download the latest MVAPICH2 software package from http://mvapich.cse.ohio-state.edu/ ii. Untar and change your current working directory to MVAPICH2 package directory. iii. Configure and install as: [root@host]# ./configure --prefix=/usr/mpi/gcc/mvapich2-x.y/ --withdevice=ch3:mrail --with-rdma=gen2 --enable-shared --with-iblibpath=/usr/lib64/ -enable-rdma-cm --libdir=/usr/mpi/gcc/mvapich2-x.y/lib64 [root@host]# make [root@host]# make install The above step will install MVAPICH2 in /usr/mpi/gcc/mvapich2-x.y/ Chelsio T5/T4 Unified Wire For Linux Page 74
