Download Craftsman 917.388013 Owner`s manual
Transcript
Owner's Manual 6.0 HORSEPOWER 21" REAR DISCHARGE ROTARY LAWN MOWER Model No. 917.388013 • • • • Safety Assembly Operation Maintenance • • Espa_ol Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman website" www.sears.com/craftsman Warranty ................................................. 2 Safety Rules ........................................ 2-4 Assembly ................................................ 5 Operation ............................................. 6-9 Maintenance Schedule ........................ 10 Maintenance .................................... 10-13 Product Specifications .......................... 11 Service and Adjustments ...................... 14 Storage ............................................ 15-16 Troubles hooting .............................. 16-17 Repair Parts ..................................... 34-39 Parts Ordering ........................ Back Cover LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Sears will repair free of charge any defect in material or workmanship. If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This Warranty does not coven • Expendable items which become worn during normal use, such as rotary mower blades, blade adapters, belts, air cleaners and spark plug. • Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to maintain the equipment according to the instructions contained in the owner's manual. Warranty service is available by returning the Craftsman power mower to the nearest Sears Service Center/Department in the United States. This warranty applies only while this product is in use in the United States. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SEARS, ROEBUCKAND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179 IMPORTANT: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. I. GENERAL OPERATION • Read, understand, and follow all instructions on the machine and in the manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting. • Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. • Only allow responsible individuals, who are familiar with the instructions, to operate the machine. • Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by the blade. • Be sure the area is clear of other people before mowing. Stop machine anyone enters the area. • Do not operate the mower when barefoot or wearing open sandals. Always wear substantial foot wear. • Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while 2 if moving backwards. • Do not operate the mower without proper guards, plates, grass catcher or other safety protective devices in place. • See manufacturer's instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer. • • • • • • Stop the blade(s) when crossing gravel drives, walks, or roads. Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute. Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher. Mow only in daylight or good artificial light. Do not operate the machine while under the influence of alcohol or drugs. Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle and walk; never • Be alert and turn machine off if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate the machine. • Use extra care when approaching blind comers, shrubs, trees, or other objects that may obscure vision. IV. SERVICE • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. -Use only an approved container. - Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. -Never refuel the machine indoors. - Never store the machine or fuel container inside where there is an open flame, such as a water heater. • Never run a machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never attempt to make wheel height adjustments while the engine (motor) is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overspeed the engine. run, • Disengage the self-propelled mechanism or drive clutch on mowers so equipped before starting the engine (motor). • If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble. • Always wear safety goggles or safety glasses with side shields when operating mower. I1.SLOPE OPERATION Slopes are a major factor related to slip and fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. * Watch for holes, ruts, or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. II1. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. 3 ALook for this symbol to point out important safety precautions. It means CAUTIONI!I BECOMEALERTII! YOUR SAFETY IS INVOLVED. AWARNING; Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of Califomia to cause cancer and birth defects or other reproductive harm. Wash hi er handling. A CAUTION: in order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. _, CAU'r h Muffler and other engine parts be_._...e extremely hot during operation and remain hot after engine has stopped. To avoid severe bums on contact, stay away from these areas. AWARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. These accessorieswere availablewhen this lawn mower was produced. They are not shipped with your mower. They are alsoavailableat most Soars retailoutletsand service centers. Most Soars storescan alsoorder repairpartsfor you, when you providethe model numberof your lawn mower. Some of these accessories may notapplyto your lawnmower. LAWN MOWER PERFORMANCE CUPPING DEFLECTOR FOR REAR DISCHARGE LAWN MOWERS GRASS CATCHERS FOR REAR DISCHARGE LAWN MOWERS MULCHER KITS /_ STABILIZER GRASS CATCHERS FOR LAWN MOWERS SIDE DISCHARGE GAS CANS LAWN MOWER MAINTENANCE AIR FILTERS MUFFLERS BELTS BLADES BLADE ADAPTERS 4 SPARK PLUGS WHEELS ENGINE OIL HOW TO SET UP YOUR LAWN MOWER Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower. IMPORTANT: Thislawnmower is shippedWITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled atthefactory withthe exception ofthosepartsleft unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. TO REMOVE LAWN MOWER FROM CARTON TO UNFOLD HANDLE IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables. 1. Raise handles until lower handle section locks into place in mowing position. 2. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 3. Remove handle padding holding operator presence control bar to upper handle. Your lawn mower handle can be adjusted for your mowing comfort. Refer to "ADJUST HANDLE" in the Service and Adjustments section of this manual. 1. Remove loose parts included with mower. 2. Cut down two end corners of carton and lay end panel down fiat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check carton thorougly for additional loose parts. Operator [ control bar Lift u Mowing position Lower handle TO INSTALL ATTACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging, see "TO CONVERT MOWER" in the Operation section of this manual. 5 KNOWYOUR LAWN MOWER READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or In literature product. Learn and understand their meaning. CAUTION OR WARNING ENGINE ON ENGINE OFF FAST SLOW CHOKE FUEL supplied OIL with the DANGER, KEEP HANDS AND FEET AWAY Operator presence control bar ,gine zone control cable Gasoline filler cap Starter Air filter Primer Grass catche Muffler Housing Engine oil cap with IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. MEETS CPSC SAFETY Wheel adjuster (on each wheel) REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the Amedcan National Standards Institute and the U.S. Consumer Product Safety Commission. The blade turns when the engine is running. Operator presence control bar - must be held down to the handle to start the engine. Release to stop the engine. Starter handle - used for starting the engine. Primer - pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. 6 TO CONVERT MOWER Your lawn mower was shippedready to be usedas a mulcher. Toconvertto bagging: The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOW TO USE YOUR ENGINE SPEED LAWN REAR BAGGING • Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins. • To convert to mulching operation, remove grass catcher and close rear door. ACAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. MOWER The engine speed was set at the factory for optimum performance. Speed is not adjustable. Pivot " Rear ENGINE ZONE CONTROL ACAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade rums when the engine is running. • Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start Catcher frame hoo? ''J TO EMPTY and operate the lawn mower. TO ADJUST cu'n'ING GRASS Lift up on grass catcher using the frame handle. 2. Remove grass catcher with clippings from under lawn mower handle. 3. Empty clippings from bag using both frame handle and bag handle. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or clown to suit your requirements. Be sure all wheels are in the same setting. NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs. Grass catcher frame handle Plate Tab Bag handle I Raise Wheels for Low Cut CATCHER 1. HEIGHT Lower Wheels for High Cut Grass catcher handle Lever 7 BEFORE STARTING ENGINE • 1,CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. ADD OIL Your lawnmower is shipped without oil in the engine. Engine holds 20 oz. of oil. For type and grade of oil to use, see "ENGINE" in Maintenance section of this manual. I. Be sure lawnmower is level and area around oil fill is clean. 2. Remove engine oil cap and fill to the full line on the dipstick. Pour oil slowly. Do not over fill. Gasoline filler cap NOTE: Allow oil to settle down into engine for accurate reading. To read proper level, tighten engine oil cap, then remove it to read the dipstick. 3. Reinstall engine oil cap and tighten. • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. ADD GASOLINE Engine oil cap TO START NOTE: engine, present product normal. • Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. ENGINE Due to protective coatings on the a small amount of smoke may be during the initial use of the and should be considered 1. To start a cold engine, push pdmer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes. _WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids dudng storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines 2. Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back. TO STOP ENGINE • To stop engine, release operator presence control bar. NOTE: In cooler weather it may be necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps. and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. 8 MOWINGTIPS MULCHING • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time. • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly. • For better grass bagging and most cutting conditions, the engine speed should be set in the fast position. • When using a rear discharge lawn mower in moist, heavy grass, clumps of cut grass may not enter the grass catcher. Reduce ground speed (pushing speed) and/or run the lawn mower over the area a second time. • If a trail of clippings is left on the right side of a rear discharge mower, mow in a clockwise direction with a small overlap to collect the clippings on the next pass. • Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. • Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life. IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. See "CLEANING" in the Maintenance section of this manual. MOWING TIPS • The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades. • Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the eady attemoon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun. • For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-third of the grass blades. If the lawn is overgrown it will be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely heavy mu}ching, reduce your width of cut by overlapping previously cut path and mow slowly. • Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path. • Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn. MAX 1/3 9 M,,,T ,ANC SC,EDULE FILL IN DATES _ :_ _:_ ,_ REGULARSERVICE Check for Loose Fasteners Clean/Inspect Grass Catcher (If Equipped) oa Clean Clean Under Lawn Mower Drive Cover W R iE ICE DATES if If If _ ! Check drive belt/pulleys (Power-Propelled Mowers) (Power-Propelled Mowers) Check/Sharpen/Replace Blade I LubricationChart Clean Battery/Recharge IEIeclric Start Mowers) _/' I_ t/3 ik/ I_ _ If4 Check Engine Oil Level Change Engine Oil Clean Air Filter I_1.= _ 2 NI Clean InspectorMuffler Replace Spark Plug E Replace AirFilterPaperCanddge I 234- I/2 Change more olten when operating undo" a heavy load or in h_gh ambient temperatures. Sentica more often when operating in dirty or dusty condiUons. Replace blades more often when mowing in sandy sodl. Chmge 48 hours at end of season. GENERAL LUBRICATION CHART (_) Wheel adjuster each wheel) RECOMMENDATIONS The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain mower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your unit. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season. • Once a year, replace the spark plug, clean or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer. • Follow the maintenance schedule in this manual. BEFORE EACH USE (!) Brake spring bracket Engine oil (_) Rear (_) Handle bracket mounting pins door hinge (_) Spray lubricant (_) See "ENGINE" in Maintenance section. 1. Check engine oil level. 2. Check for loose fasteners. LUBRICATION Keep unit well lubricated (See "LUBRICATION CHART"). 10 IMPORTANT: Do not oil or grease plastic wheel bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. PRODUCT SPECIFICATIONS SERIAL NUMBER: DATE OF PURCHASE: 'GASOLINE I OILTYPE CAPACITY/TYPE: (API-SF-SJ): 1.5 QUARTS (UNLEADED REGULAR) SAE 30 (ABOVE 32°F); SAE 5W-30 (BELOW !OIL CAPACITY: 32°F) 20 OUNCES SPARK PLUG (GAP: .045") BLADE BOLT TORQUE: CHAMPION RESISTOR TYPE RJ19LM4 35-40 FT. LBS. The model and serial numbers will be found on a decal on the rear of the mower housing. Record both serial number and date of purchase in space provided above. LAWNMOWER Always observesafety ruleswhen performingany maintenance. TIRES • Keep tires free of gasoline, oil, or insect control chemicalswhich can harm rubber. • Avoid stumps,stones, deep ruts,sharp objectsand otherhazards that may cause tire damage. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. TO REMOVE BLADE 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Turn lawn mower on its side. Make sure air filter and carburetor are up. 3. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 4. Remove blade bolt by turning counterclockwise. 5. Remove blade and attaching hardware (bolt, lock washer and hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged. TO REPLACE BLADE 1. Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned. 2. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. 3. Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine. 4. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 5. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. Ibs. IMPORTANT: Blade bolt is grade 8 heat treated. TO SHARPEN BLADE NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. • To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizonlal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. Blade adapter _ Key -...._ Crankshaft "_ B,a0e'° kwas 11 washer Trailin edge "_ keyway Blade adapter GRASS TO CHANGE CATCHER • The grass catcher may be hosed with water, but must be dry when used. • Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering. ENGINE LUBRICATION Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil's SAE viscosity grade according to your expected operating temperature. SAE VISCOSITY GRADES ENGINE OIL NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty. 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine. 4. Wipe off any spilled oil on lawn mower and on side of engine. 5. Fill engine with oil. (See "ADD OIL" in the Operation section of this manual.) 6. Reconnect spark plug wire to spark plug. 0 TEMPERATURE RANGE ANTICIPATL_O BEFORE NEXT OIL CHA_IG E NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Container Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. 12 AIR FILTER MUFFLER Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. Do not wash air filter. Inspect and replace corroded muffler as it could create a fire hazard and/or damage. TO CHANGE AIR FILTER 1. Remove the air filter by turning clockwise to the stop and pull away from collar. 2. Remove filter from inside of cover. 3. Clean the inside of the cover and the collar to remove any dirt accumulation. 4. Insert new filter into cover. 5. Put air filter cover and filter into collar aligning the tab with the slot. 6. Push in on cover and turn counterclockwise to tighten. Collar Turn Clip ctockwise to Slot Air fitter cover mum counterclockwise to tighten SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. CLEANING IMPORTANT: For best performance, keep mower housing free of built-up grass and trash. Clean the underside of your mower after each use. _:t_CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with the spark plug. • Clean the underside of your lawn mower by scraping to remove build-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. • Keep finished surfaces and wheels free of all gasoline, oil, etc. • We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life. 13 _,CAUTION: Before performing any service or adjustments: t. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ASSEMBLE TO ADJUST bag gets wet, let it dry before using. _I, CAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open. CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" the Operation section of this manual. REAR DEFLECTOR in The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deflector becomes damaged, it should be replaced. TO ADJUST HANDLE The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle. 1. Remove upper handle and all parts attached to lower handle. 2. Remove hairpin cotters from lower handle bracket mounting pin. 3. Squeeze lower handle in to remove it from mounting pins. 4. Turn lower handle over to raise or lower handle. 5. Squeeze lower handle in and position holes onto mounting pins on handle bracket. 6. Reassemble upper handle and all parts removed from lower handle. '\ J GRASS CATCHER 1. Put grass catcher frame into grass bag with dgid part of bag on the bottom. Make sure the frame handle is outside of the bag top, 2. Slip vinyl bindings over frame. NOTE: if vinyl bindings are too stiff, hold them in warm water for a few minutes. If frame _.._._J.._F"_ _._ hand___a _ _v opening ENGINE ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to a Sears or other qualified service center for repair and adjustment. CARBURETOR Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments. Lower handle 'k.- Rotate 14 Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. Operator LAWN Upper handle ---._,_/// MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 4. Touch up all rusted or chipped paint surfaces; sand lightly before painting. HANDLE You can fold your lawn mower handle for storage. 1. Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward. 2. Loosen upper handle mounting bolts enough to allow upper handle to be folded back. IMPORTANT: When folding the handle for storage or transportation, be sure to fold the handle as shown or you may damage the control cables. • When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position. Lower handle Handle bracket presence._ control bar /Z// Fold ip_,, ,,.',fortoward # _ r_'/// storage // jy zl _'_y'_"_!"t_ky,//_ fy /_ ////_ Fold backward \ ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. 1. Drain the fuel tank. 2. Start the engine and let it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer. ENGINE OIL Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). Hairpin cotter 15 CYLINDER • If possible, store your unit indoors and cover it to give protection from dust and dirt. 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through spark plug hole into cylinder. 3. Pull starter handle slowly a few times to distribute oil. 4. Replace with new spark plug. OTHER • Do not store to another. • Replace your starts to rust. gasoline will gasoline CAUSE 1. Dirty air filter. 1. Clean/replace air filter. 2. Fill fuel tank. 3. Drain tank and refill with fresh, clean fuel. 4. Drain fuel tank and carburetor and refill tank with fresh gasoline. 5. Connect wire to plug. Out of fuel. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. 7. Bad spark plug. Loose blade or broken blade adapter. Control bar in released position. Control bar defective. 9. 1. Rear of lawn mower 2. 3. 4. 5. 6. Excessive vibration CORRECTION 2. 3. 8. Poor cut uneven one season CHART PROBLEM Loss of power Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust. IMPORTANT: Never cover mower while engone and exhaust areas are still warm. _, CAUTION:Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. gasoline can if your can Rust and/or dirt in your cause problems. TROUBLESHOOTING Does not start from • Cover your unit with a suitable protective cover that does not retain moisture. housing or cutting blade dragging in heavy grass. Cutting too much grass. Dirty air filter. Buildup of grass, leaves, and trash under mower. Too much oil in engine. Walking speed too fast. 1. Wom, bent or loose blade. ;2. Wheel heights uneven. i 3. Buildup of grass, leaves and trash under mower. 1. Worn, bent or loose blade. 2. Bent engine crankshaft. 6. Replace 7. Tighten replace 8. Depress handle. 9. Replace spark plug. blade bolt or blade adapter. control bar to control bar. 1. Set to "Higher Cut" position. 2. 3. 4. 5. 6. Set to "Higher Cut" position. Clean/replace air filter. Clean underside of mower housing. Check oil level. Cut at slower speed. walking 1. Replace blade. Tighten blade bolt. 2. Set all wheels at same height. 3. Clean underside of mower housing. 1. Replace blade. "Nghten blade bolt. 2. Contact a Sears or other qualified service center. 16 TROUBLESHOOTING PROBLEM Starter rope hard topull CHART CORRECTION CAUSE 1. Engine flywheel brake is on when control bar is released 2. Bent engine crankshaft. 3. Blade adapter broken. 4. Blade dragging in grass. 1. Depress control bar to upper handle before pulling starter rope. 2. Contact a Sears or other qualified service center. 3, Replace blade adapter. 4. Move lawn mower to cut grass or to hard surface. Grass catcher notfilling (if so equipped) 1. Cutting height too low. 2. Lift on blade worn off. 3. Catcher not venting air. 1. Raise cutting height, 2. Replace blade. 3. Clean grass catcher. Hard to push 1. Grass is too high or wheel height is too low. 2. Rear of lawn mower housing or cutting blade dragging in grass. 3. Grass catcher too full. 4. Handle height position not right for you. 1. Raise cutting height. 17 2. Raise rear of lawn mower housing one (1) setting higher. 3. Empty grass catcher. 4. Adjust handle height to suit. Garanffa ............................................... 18 Reglas de Seguridad ..................... 18-20 Montaje ................................................ 21 Operaci6n ....................................... 22-25 Mantenimiento ..................................... 26 Programa de Mantenimiento .......... 26-29 Especificaciones del Producto ............ 27 Servicio y Adjustes .............................. 30 Almacenamiento ............................ 31-32 Identificaci6n de problemas ........... 32-33 Partes de repuesto ........... Vea el manual ingl6s del dueho Orden de Partes .................... Contratapa GARANT{A LIMITADA DE DOS AI_IOS PARA LA SEGADORA A MOTOR CRAFTSMAN Por dos (2) aSos, a partir de la fecha de compra, cuande esta Segadora Craftsman se mantenga, lubrique y afine seg_n las instrucoiones para la operaci6n y el mantenimiento en el manual del duefio, Sears reparar& gratis todo defecto en el material y la mano de obra. Si la Segadora Craftsman se usa para fines oemercialas o de arriendo, esta garantia s61o se aplica por noventa (90) dias a partir de la fecha de compra. Esta Garantia no cubre: • Arffculos que se desgastan durante el uso normal tales como las cuchillas segadoras rotatodas, los adaptadores de la cuchilla, las correas, los fUtros de aire y las bujfas. • Reparaciones necesarias debido al abuso o a la negligencia del operador, incluydndose a los cig0efiales doblades y a la falta de mantenimlento del equipo seg_n las instrucciones que se incluyen an el manual del duei_o. EL SERVIClO DE GARANT[A ESTA DISPONIBLE al devolver la segadora a motor Craftsman al Centro/Departmento de Servicio Sears mas cercano an los Estados Unidos. Esta garantia se aplica solarnente mientras el preducto aste en uso en los Estados Unidos. Esta Garant{a le otorga derechos legales especiticos, y puede que tambi6n tenga otms derechos que varian de estado a estado. SEARS, ROEBUCK AND CO., D/817WA, HOFFMAN ESTATES, IL 60179 USA IMPORTANTE: Esta maquina cortadaora es capaz de amputar las manes y los manos y los pies y de lanzar objetos. Si no se observan las instrucciones de seguridad siguiantas se pueden producir lesionas graves o la muerte. I. OPERACION • No tire de la segadora hacia atras a manos • Antes de empezar, debe familiarizarse que sea absolutamente necosario. Mire completamente con los controles y el uso siempre hacia abajo y hacia detr_.s antes y correcto de la maquina. Para esto, debe leer mientras que se mueve hacia atrbs. y comprender todas las instrucciones que • No opere la segadora sin los respectivos aparecen en la maquina yen los manuales resguardos, las placas, el recogeder de de operacldn. c_sped u otros aditamentos dise ados para • No ponga las manos o los pies cerca o su protecoion y seguridad. debajo de las partas mtatorias. Mantdngase • Refi_rase alas instrucciones del fabricante siempre lejos de la abertura de la descarga. para el funcionamiente e instalaci6n de • Permita que solamente las personas accosorios. Use _nicamante ascesorios responsables que est6n famillarizadas con aprobados por el fabricante. las instrucciones operen la m_.quina. • Detanga la cuchilla o las cuchillas cuando • Despeje el drea de objetos tales come cruco por calzadas, callas o cominos de piedras, juguetes, alambras, huesos, palos, grava. etc. que pueden ser recogidos y lanzados • Parar el motor cada vez que se abandana por las cuchillas. el aparato, antes de limpiar la segadora o de • Aseg=irese que el _rea no se hallen remover residues dal tubo. personas, antes de segar. Pare la m_iquina • Apagar el motor y esperar hasta que las si alguien entra en el area. cuchillas est_n completamente paradas • No opere la maquina sin zapatos o con antes de remover el receptor de hierba. sandalias abiertas. Pdngase siempre • Segar solamente con luz del d_a e con una zapatos sblides. buena luz artificial. 18 • No opere la mdquina bajo la influencia del alcohol o de las dregas. • Nunca opere ta maquina cuando la hierba est& mojade. Aseg_rese siempre de tener buena tracci6n en sus pies; mantenga el mango firmemente y camine; nunca corm. • Desconectar el mecanismo de propulsi6n aut6noma o el embrague de transmisi6n en las segadoras que Io tienen antes de porter en marcha el motor. • Si el equipo empezara a vibrar de una manera anormal, pare el motor y revise de inmediato para averiguar la causa. Generalmente la vibraci6n suele indicar que existe alguna averla. • Siempre use galas de segurided o anteojos con protecoi6n lateral cuando opere la segadora. II. OPERAClON SOBRE I.AS CUESTAS Los accidentes ocurren con m_.s frecuencia en las ouestas. Estos accidentes ocurren debido a resbaladas o caidas, las cuales puedan resultar en graves lesiones. Operer la recortadora en cuestas requiere mayor concentracibn. Si se siente inseguro en una cuesta, no la recorte. HACER" • Puede recortar a travds de la superficie de la cuesta, nunca hacia arriba y hacia abajo. Proceda con extrema precauci6n cuando cambie de direcci6n en las cuestas. • Renueva todos los objetos extraSos, tales como guijarros, ramas, etc. • Debe prestar atenci6n a hoyos, baches o protuberancias. Recuerde que la hierba alta puede esconder obst_,culos. NO HACER: • No recorte cerca de pendientes, zanjas o terraplenes. El operador puede perder la tracci6n en los pies o el equilibrio. • No recorte cuestas demasiado inclinades. • No recorte en hierba mojada. La reducci6n en la tracci6n de la pisada puede causar resbalones. III.NII_IOS Se pueden producir accidentes trdgicos si el operador no presta atenci6n a la presencia de los niSos. A menudo, los ni_os se sianten a!ra[dos por la maquina y por la actividad de la s=ega.Nunca suponga que los ni_os van a permanecer en el mismo lugar donde los vie por _ltima vez. • Mantenga a los niSos alejados del &rea de la s]ega y bajo el cuidado estricto de otra persona adulta responsable. • Estd aierta y apague ]a m._quina si hay nii_os que entran al area. • Antes y cuando este retrecodiendo, mire hacia atrds y hacia abajo para veriflcar si hay nii_os peque_os. • Nunca permita que los niSos operen la mdquina. • Tenga un cuidado extra cuando se acerque a esquinas donde no hay visibilided, a los arbustos, &rboles u otres objetos que pueden interferir con su Iinea de visi6n. IV. SERVICIO • Tenga cuidado extra al manejar la gasolina y los demds combustibles. Son inflamables y los gases son explosivos. - Use solamente un envase aprebado. - Nunca remueva la tapa del dep6sito de gasolina o agregue combustible con el motor funcionando. Permita que el motor se enfrie antes de volver a pone combustible. No fume. - Nunca vuelva a poner combustible en la mdquina en recintos cerredos. - Nunca almacene la m,_quina o el envase del combustible dentro de alg6n lugar en donde haya una llama expuesta, ta] como la del caientador de agua. • Nunca haga funcionar una mdquina dentro de un _.rea cerrada. • Nunca haga ajustes o reparaciones mientres el motor estd en marcha. Desconecte el cable de la bujia, y mantdngalo a cierta distancia de _sta para prevenir un arranque accidental. • Mantenga las tuercas y los pemos, especialmente los pernos del accesorio de la cuchilla, apretados y mantenga el equipo en buenas condiciones. • Nunca manipule de forma indebida los dispositivos de seguridad. Contrele regularmente su funcionamiento correcto. • Mantenga la m._quina libre de hierba, hojas u otras acumulaciones de desperdicio. Limpie los derrames de aceite o combustible. Permita que la maquina se enfrie antes de almacenada. • Pare e inspeccione el equlpo si le pega a un objeto. Rep._relo, si es necesario, antes de hacerlo arrancar. • En ningSn caso hay que regular la alture de las ruedas mientras el motor esta.en marcha. • Los componentes del receptor de la hierba van sujetos a desgaste, daSos y deterioro, que pueden exporter las partes en movimiento o permitir que objetos sean disparados. Controlar frecuentemente y cuando sea necesario sustituir con partes aconsejadas por el fabricante. • Las cuchillas de la segadora estan afiladas y pueden cortar. Cubrir las hojas o lievar guantes, y utilizar precaucienes especiales cuando se efectSa mantenimiento sobre las mismas. • No carnbie el ajuste del regulador del motor ni excode su velocidad. 19 _I_DVERTENCIA: Los bomes, terminales y accesodosrela_vosde la bateda conl_enonplomo o compuestcsde plomo, productosquimicos conocidosen el Estado de Calitomiacomo causa de _r y defectos el nacimientou otrosdar3os reproducUvos.Lavar las manos despu_s de manipularlos. _usque este slmboloque sehala las precauciones de segu.ridad de importancia,tJuieredecir iiiATENCION!!! IllESTE ALERTO!!! SU SEGURIDAD ESTA COMPROMET]DA. _J)RECAUCI6N: Siempre desconecteel alambrede la buiiay pongalo donde no pueda entraren contactocon la bujia, para evitar el arranquepor accidente,durante la preparaci6n,el transporte,el ajuste o cuando se hacen reparaciones. de,_l mRECAUCl6N:El silenciador y otras piezas otor Ilegan a ser extremadamente calientes durante la operaci6n y siguen siendo calientes despu6s de que el motor haya parado. Para evitar quemaduras severas, permanezca lejos de estas _reas. 4_,DVERTENCIA: [] tubo de escape del motor, algunosde sus constituyentesy algunos componentesdel vehiculo conUeneno despmnden productos quimicos conoeldosen el Estado de Californiacomo causa de cdncery defectos el nacimientou otrosdet_os reproductivos. Estos accesorios estaban olsponiblescuando se produjola segadora, No son facilitados Juntoal cortacesped. Estdn disponiblesen la mayoriade las tiendesde Sears y en los centrosde servicio.La mayoria de las tiendasSears tarnbi_npueden mandar a pedir pades de repueslopara usted,si les propoucionael n0mem del modelode su segadora.Algunosde estos accesoriestalvez no se apliquena su segadora. RENDIMIENTO DESVlADOR DE LA SEGADORA DE RECORTES PARA SEGADORAS CON DESCARGA TRASERA JUEGOS PARA LA ACOLCHADORA PAPA SEGADORAS CON RECOREDOR DESCARGA TRASERA MANTENIMIENTO PARA SEGADORAS CON DESCARGA RECOREDOR LATERAL /_ _ASES DE GASOLINA DE LA SEGADORA SILENCIAOORES F]LTROS DE AIRE BUJ[AS ql ADAPTADORES CORREAS ESTABILIZADORES CUCHILLAS DE CUCHILLA 20 ,; ACEITE RUEDAS DEL MOTOR Lea estas instrucciones y el manual completamente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: ESTE CORTACESPED VIENE SIN ACEITE O GASOLINA EN EL MOTOR. Su segadora nueva ha sido montada en la fdbdca con la excepcibn de aquellas partes que se dejaron sin montar por razones de envl'o. Todas )as parles como las tuemas, las arandelas, los pernos, etc., que son necesadas para completar el montaje ban sido colocadas en la bolsa de partes. Para asegurarse que su segadora funcione en torma segura y adecuada, todas las partes y los artl'eulos de ferreter|a que as monten tienen que ser apretados seguramente. Use las herramiantas correctas, como sea neeesado, para asegurar que se aprieten adecuadamente. PARA REMOVER LA SEGADORA DE LA CAJA DE CARTON 1. Remueva las partes sueltas que se incluyen con la segadora. 2. Corte las dos esquinas de los extremos de la caja de cart6n y tienda el panel del extremo piano. 3. Remueva todo el material de empaque, excepto la cuSa entre el mango superior y _1 inferior, y la euSa que sujeta la barra de los control que exige la presencia del operador junto con el mango superior. 4. Haga rodar la segadora hacia afuera de la caja de cart6n y revisela cuidadosamente para verificar si todavia quedan partes sueltas adicionales. COMO PREPARAR SU SEGADORA PARA DESDOBLAR EL MANGO IMPORTANTE: Despliegue el mango con mucho cuidado para no pellizcar o daSar los cables de control. 1. Levante los mangos hasta que la secci6n del mango inferior se asegure en su lugar, en la posici6n para segar. 2. Remueva la cuSa protectora, levante la secci6n del mango superior hasta su lugar en el mango interior, y apriete ambas manillas del mango. 3. Remueva la cuba del mango que sujeta la barra de los control que exige la presencia del operador junto con el mango superior. El mango de la segadora puede ajustarse seg6n le acomode para segar. Refi_rase a "AJUSTE DEL MANGO" en la Secci6n de Servicio y Ajustes de este manual. _,_::seupCOe::: __ que s>ige_esencia del op_r POS_n p_ra segar PARA INSTALAR LOS ACCESORIOS Su segadora fue enviada lista para usarse como una acolchadora de capa vegetal. Para convertirla de modo que pueda ensacar, refidrase a "PARA CONVERIR LA SEGADORA" en la Secci6n de Operaci6n de este manual. 21 FAMIUARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y I_AS REGLAS DE SEGURIDAD ANTES DE OPARAR SU SEGADORA. Compare las ilustraciones con su segadora para familiadzarse con la ubicaci6n de los diversos controlesy ajustes. Guarde este manual pard referenciaen el futuro. Estos sfmbolos pueden apareser sobre su segadora o en la literatura proporcionada con el producto. Aprenda y comprenda sus slgnlflcados. A_rENCI_N O ADVERTENCIA MOTOR ENCENDIDO MOTOR APAGAOO RAPIDO LENTO ESTFIANGU LACI(_N COMBUSTIBLE ACFITE PEUGRO, GUARDE LAS MANOS Y LOS PIES LEJOS :lueexige la presencia deloperader del motor k_nilladelrnango Tapa del depositode la gasolina Corden arrancader Fillro de aire Cebador Recogedor de c_sped Silenciader Tapa det deposito de aciete del motor con varilla indicadora de nivel Ajustador de la rueda (en cada ruede) IMPORTANTE: Este cortacdsped viene SIN ACEITE O GASOLINA en el motor. CUMPLE CON LOS REQUISITOS DE SEGURIDAD DE LA CPSC Las segadoras a motor, que se conducen desde la parte de atras, rotatorias, Sears, cumplen con los ostandares de seguridad del American National Standards Institute y de la U.S. Consumer Product Safety Commission. La ouchilla gira cuando el motor estd funcionando. Barra de control que exige la presencia del operador - tieno que sujetarse abajo, junto con el mango, para hacer arrancar el motor. Su_itela para parar el motor. Cord6n arrancador- se usa para hacer arrancar el motor. Cebador - bombea combustible adicional desde el carburador al cilindro para uso cuande se necesita hacer arrancar un motor frlo. 22 PARA CONVERTIR LA SEGADORA Su segadora fue enviada lista para usarse como acolchadora de capa vegetal. Para convertida a una operaci6n de ensacado: SEGADORAS CON DESCARGA TRASERA segadora puede hacer que salten objetos extrai_os dentro La sus de operaci6n ojos, Iodeque cualquier puede producir daSos graves en dstos. Siempra use anteojos de seguridad o pmtecci6n para los ojos mientras opere su segadora o cuando haga ajustes o reparaciones. Recomendamos una mascara de seguridad de visi6n amplia, para uso espejuelos o anteojos do seguridad estandarte. COMO USAR SU SEGADORA VELOClDAD DEL MOTOR La velocidad del motor se estableci6 en la ldbdca para un rendimiento 6ptimo. La velocidad no se puede ajustar. CONTROL DE ZONA DEL MOTOR _I_PRECAUCI6N: Las regulaciones federales exlgen qua so instale un control para el motor en esta segadora para reducir a un mfnimo el riesgo de lesionarse debido al contacto con la cuchUla. Por ning0n motivo trate de eliminar la funci6n del control del operador. La cuchilla gira cuando el motor est& funcionando. • Su segadora viene equipada con una barra de controles que exigen la presencia del operador, Io que requiem qua el operador estd detrds del mango de la segadora para haceda arrancar y operarla. • Levantar la puerta trasera de cortac_sped y colocar los ganchos del armaz6n de la recolectora de hierba en los pasadores del quicio de la puerta. • Para pasar a la opercai6n de acolchamiento, remover la reeoloctora de hierba y cerrar la puerta trasera. _PRECAUCI()N: NO haga funcionar su segadora sin el desviador de recortes o sin el recogedor de c6sped, aprobados, en su lugar. Nunca trate de oparar la segadora cuando se ha removido la puerta trasera o euando est& un poco abierta. Pasador del Mango del bastidor del recogedorde Gancho lateral del basUdordel recogedor PARA AJUSTAR LA ALTURA DE CORTE Levante las ruedas para el corte bajo y baje las ruedas para el corte alto., ajuste la altura de corte para qua se acomode a sus requisitos. La posici6n del medio es la mejor para la mayoda de los cdspedes. • Para cambiar la altura de corte, empuje la palanca del ajustador hacia la rueda. Mueva la rueda hacia arriba o hacia abajo de modo qua se acomode a sus requisitos. Aseg0rese qua todas las ruedas queden igualmente ajustadas. AVISO: El ajustador esta correctamente colocado cuando las orejas de la placa estdn insertadas en el agujero del mango. Tambien, los ajustes de 9 posiciones (si equipado) permiten que el mango pueda ser movido entre las orejas de la placa. Para un corte afro,baje las ruedas Puerta PARA VACIAR EL RECOGEDOR DE ClaSPED 1. Levante el recogedor de c_sped usando el mango del bastidor. 2. Remueva el recogedor de cdsped, con los recortes, de debajo del mango de la segadora. 3. Vacfo los recortes de la bolsa usando tanto el mango del bastidor como 61de la bolsa. AVISO: No arrastre la bolsa cuando la vacie; se producird un desgaste innecesado. Orejas de Mango del bastidor del c6sped Paraun cortebajo, levantelas ruedas Mango 23 Mango de la bolsa ANTES DE HACER ARRANCAR EL MOTOR AGREGUE ACEITE Su segadora fue enviada sin aceito en el motor. El motor puede contener 20 oz. de aceite. Para el tipo y la calidad yea =MOTOR" en la secci6n de las Mantenimento en este manual. 1. AsegSrese que la segadora est_ nivelada y quo el drea alrededor del depbsito de aceite est_ limpia. 2. Remueva la tapa del dep6sito de aeeite del motor y rellene basta la linea de llano en _sta. Vacle el aceite lentamente. No Io Ilene demasiado. AMISO: Permita que el aeeite se aciente bien en el motor para una lectura exacta. Para leer el nivel apropiado, apriete la tapa del relleno del aceite de motor, remuevala para leer la varilla medidora del aceite. 3. Vuelva a instalar la tapa del dep6sito del aceite y apri6tela. • Revise el nivel del aceite antes de cada uso. Agregue aceito si es neeesario. Llene hasta la Ifnea de Ileno en la varilla indicadora de nivel. • Cambie el aceite despu6s de 25 horas de operacibn o una vez por temporada. Puede necesitar eambiar el aceite m_.s a menudo cuando las eondiciones son polvorosas o sueias. AGREGUE GASOLINA • Uene el estanque de combustible. Use gasolina regular, sin plomo, nueva y limpia con el mfnimo de 87 octanos. (El uso de gasoline con plomo aumentar_ los depbsitos de 6xido de plomo y carbono y se reducird la duraci6n de la v_.lvula). No mezcle el aceite con la gasolina. Para asegurar que la gasolina utilizada sea fresca compre estanques los euales puedan ser utilizados durante los primeros 30 dias. _ADVERTENCIA:La expedencia ha indicado que los combustibles mezclados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separaci6n y formacibn de dcidos durante el almacenarniento. La gasolina acfdica puede dahar el sistema del combustible de un motor durante el almacenamiento. Pare evitar los problemas con el motor, se debe vaciar el sistema del combustible antes de guardado pot un perfodo de 30 dias o rods. Vacie el estanque del combustible, haga arrancar el motor y hdgalo funcionar basra que tas Ifneas del combustible y el carburador queden vacfos. La pr6xima tempomda use combustible nuevo. Vea las instrucciones para [] Almacenamiento para mds informacibn. Nunca use productos de limpieza para el motor o para el carburedor en el estanque del combustible pues se pueden producir da_os p.ermanentes. • I,PRECAUCI(_N: Lleno hasta la parte inferior del cuello de relleno del estanque de gasolina. No Io Ilene demasiado. Limpie el aceite o el combustible derramado. No almacene, derrame o use gasolina cerca de una llama expuesta. Tapadel la gasollna Tapa del deposltode aceite PARA HACER ARRANCAR EL MOTOR AVISO: Debido alas capas protectoras del motor, una cantidad pequeSa de humo puede estar presente dumnte el uso inicial del producto y se debe considerar normal. 1. Pare hacer arrancar un motor frio, empuje el cebador tres (3) veces antes de tratarlo. Empuje firmemente. Este paso normalmente no es necesario cuando se hace arrancar un motor que ya ha estado funcionando per unos cuantos minutos. 2. Sujete la barra de contmles que exigen la presencia del operador abajo en el mango y tire el mango del arrancador rdpidamente. No permita que el cord6n del arrancador se devuelva abruptamente. PARA PARAR EL MOTOR • Pare parar el motor, suelte la barra de controles que exigen la presencia del operador. AVlSO: En climas m&s trfos puede que sea necesario repetir los pasos del cebado. En climas m&s calurosos el cebar demasiado puede producir el ahogo y el molor no va a arrancar. Si se ahoga el motor espere unos cuantos minutos antes de tratar de hacedo arrancar y no repita los pasos del cebado. 24 CONSEJOS PARA SEGAR • Bajo ciertas condiciones, tal como c_sped muy alto, puedo set necesario el elevar la altupa dal corte para reducir el esfuerzo necesario papa empujar la segadora y para evitar sobpacargar el motor, dejando montones de recortes de c_sped. Puede que sea necesario reducir la velocidad del recorrido y/o haga funcionar la segadora sobpa el drea por segunda vez. • Para un code muy pesado, reduzca el ancho del corle pasando parcialmente pot encima del lugar antedormente cortado y siegue lentamente. • Papa un mejor ensacado del c_sped y para la mayorfa de las condiciones de code, la velocidad del motor debe ajustarse a la posicibn de r_pido. • Cuando use una segadopa con descarga tpasera en cdsped h_medo y pesado, los montones del c6sped cortado puede que no entrenen el recogedor de c_sped. Reduzca la velocidad del recorddo (velocidad de empuje) y/o haga funcionar la segadopa sobpa el drea por segunda vez. • Si queda una huella de cortes en el lado dereeho de una segadopa con descarga tpasera, siegue en la dipacci6n en que gipan las manillas del reloj, solapando un pc,co para recaudar los recortes en la pr6xima pasada. • Los pores en los recogedopas de c_sped de tela pueden Ilenarse con mugre y polvo con el uso y los recogedores recaudar._n menos c_sped. Papa evitar _ste, rocfe el recogedor con la manguepa de agua regularmente y dejelo secarse antes de usarlo. • Mantenga la parle superior del motor, alrededor del arrancador, despejada y sin recortes de c_sped y paja. Esto ayudar_, el flujo del aire del motor y extendera, su duraci6n. CONSEJOS PARA SEGAR Y ACOLCHAR IMPORTANTE: Para obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea "LIMPIEZA" in ]a seccion Mantenimiento de este manual. • La cuchilla acolchadopa especial va a volver a cortar los recortes de c_sped muchas veces, y los reduce en tamafio, de modo que si se caen en el c_sped se van a dispersar entre _ste y no se van a notar. Tambi6n, el c6sped acolchado so va a deshacer r_pidamente entregando substancias nutritivas para el c_sped. Siempre acolche con la velocidad del motor (cuchilla) mds alta, pues asi se obtendrd la mejor acci6n de recorte de las cuchillas. • Evite eortar el c6sped cuaedo est6 mojado. El c_sped rnojado tiende a format montones e interfiere con la aeci6n de acolchado. La mejor hora para segar el c_sped es temppano en la tarde. A esa hora este se ha secado y el drea reci_n cortada no quedara expuesta al sol directo. • Papa obtener los mejores resultados, ajuste la altura del code de la segadora de modo que _sta corte solamente el tercio superior de las hojas de c6sped. En el caso de que el c_sped haya cpacido demasiado, puede set eecesario el elevar la altupa del corte para reducir el esfuerzo necesado para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de cdsped. Papa un acolehamiento muy pesado, reduzca el anche del corte pasando pot encima del lugar antedormente cortado y siegue lentamente. • Ciertos tipos de c_sped y sus condiciones pueden exigir que un dpaa tenga que set acolchada por segunda vez para esconder complelamente los recortes. Cuando se haga el segundo corte, siegue atpavesado o en forma perpendicular a la pasada del primer corte. • Cambie su patr6n de corte de semana a semana. Siegue de node a sur una semana y luego cambie de este a oeste la pr6xima semana. Esto evitard que el c6sped se enrede y cambie de direccibn. MAX 1/3 25 ,.oo +,,DE ++,,o,+o +, S Revisar sl ha_/su_etadores sue]tos Limpiar/inspeccionar el recogedor de _ c_sped la (sisegadora viene equipado) Lirnpiar I_#' V' _ Umplar debajo de la cubierta de la transmisibn (segadoras con poder propulsor) o Revisar las correas y las poleas impulsadas (se_adoras con poder propulsor) If Revlsar o/afllarlcamblar la cuchilla _3 Tabla de lubricacibn If ll_ Umpiar la baterla/recargar segadoras con arronque el6ctrico) I## VP4 o" Revisar el nivel del aceile R I_ Cambiar el aceite del motor V'1,5 Umpiar el fittro de aim Inspeccionar el silenciador ik/2 Ltmpiar o/camblat la bujia Cambiar el caducho de papel del filtro de aire If 2 1 - Cambiar rnd_ a menudo cuando so opere ba_o carga pesada o en amblentes co_ altas temperaturas. 2 - Dar seNicio n_s a menudo cuando se opere en ¢_liciones sucias o polvorosas. 3 - Carnbie IM cuchlllas m_ a rnenudo cuando siegue en terr=_o amnoso. 4-Cargarpor48horasalfin delatemporada. TABLA DE LUBRICACI(_N (_) Ajus ador de la rueda RECOMENDACIONES GENERALES La garantl'a de esta segadora no cubre los artlculos que han estado sujetos al abuso o a la negligencia del operador. Para recibir todo el valor de la garanfia, el operador tiene que mantener la segadora seg,',n las instrucciones descritas en este manual. Hay algunos ajustes que se tJenen qua hacer en forma peri6dica para poder mantener su unidad adecuadamente. Todos los ajustes en la secci6n de Servicio y Ajustes de este manual tienen que set revisados per Io menos un vez per cada temporada. • Una vez al a_o, cambie la buj[a, limpie o cambie el elemento del filtro de alre y revise si la cuchilla estd desgastada. Una bujia nueva y un elemento del filtro de alre limpio/ nuevo aseguran la mezcla de alrecombustible adecuada y ayudan a que su motor funcione mejor y que dure m_Ls. • Siga el programa de mantenimianto en este manual. ANTES DE CADA USO t. Revise el nivel del aceite del motor. 2. Revise si hay sujetadores sueltos. LUBRICACI(_N Mantenga la unidad bien lubricada (vea la "rABLA DE LUBRICACION"), (_) Puntal de reserte del freno _) Aceite del motor Bisagra de la puerta traser (D Clavija de montaje del puntal del mango (_) Rocleel lubrlcante _) Vea"MOTOR"en la secclondeMantenlmlento 26 IMPORTANTE: No aseita o engrase los rodamientos de la rueda de plastico. Los lubricantes viscosos atearan polvo y mugre, Io acortara la duranion de los rodamiantos autolubricantes. Si crae que tienen que lubricarse, use Iosamente un lubricante tipo crafito, de polvo seco, en forma moderada. ESPECIFICACIONES DEL PRODUCTO _IOMERO DE SERIE: :ECHA DE COMPRA: .3APAClDAD Y TIPO DE GASOLINA: "IPO DE ACEITE (API-SF-SJ): ._APAClDAD DE ACEITE: 1.5 CUARTOS (REGULAR SAE 30 (sobre 32°F);SAE 20 ONZAS CHAMPION ;UJJA (ABERTURA: .045") ORSION DEL PERNO DE LA CUCHILLA: SIN PLOMO) 5W°30 (debajo 32°F) RJ19LM4 35-40 FT. LBS. El num_ro del nodelo y el de saris se encuentran en la calcomania adjunta ala parts trasera de la caja de la segadora. Debe registrar tanto el numdro de sede come la fecha de compra y mantengalos en un lugar seguro para refencia en el futuro. ;EGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Mantenga ias Ilantas sin gasolina, aceite o substancias qu|micas para control de insectos que pueden dafiar la goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden dafiar alas Ilantas. CUlDADO DE LA CUCHILLA Pare obtener los mejores resultados, la cuchilla de la segadora tienen que mantenerae afilada. Cambie la cuchilla doblada o dai_ada. PARA REMOVER LA CUCHILLA 1. Desconecte el alambre de la buj[a y pbngalo en donda no pueda entrar en contacto con _sta. 2. Haga descansar la segadora en su lado. AsegOrese qua el filtro de afro y que el carburador queden mirando hacia arriba. 3. Use un bloque de madera entre la cuchilla y la caja de la segadora para evitar que la cuchilla gire cuando se le quite el psrno. AVISO: Proteia sus manos con guantes y/o envuelva la cuchilla con una tela gruesa. 4. Remueva el pemo de la cuchilla girdndolo en el ssntido contrario en que giran las manillas del reloj. 5. Remueva la cuchilla y los artfculos de ferrateda adjuntadores (el pemo, la arandela de seguridad y la arandela endurecida). AVISO: Remueva el adaptador do la cuchilla y revise el cubo inlerior de la ranura del adaptador de la cuchilla. La ranura tiene que estar en buenas condiciones pare que funcione en forrna adecuada. Cambie el adaptador si estd dafiado. PARA CAMBIAR LA CUCHILLA Ponga el adaptador de la cuchilla en el ciguefial del motor. Asegdrese qua la ranura del adaptador y que el chavetero del ciguefial ostdn alineados. 2. Ponga la cuchilla en el adaptador de _sta alineando los dos (2) agujeros en la cuchilla con las salientes elevadas en el adaptador. 3. Aseg_rase de que el borde de salida de la cuchilla (opuesto al borde alilado) est_ hacia arriba hacia el motor. 4. Instala el pemo de la cuchilla con la arandela de seguridad y la arandela endurecida en el adaptador de la cuehilla y el ciguefiaL 5. Use un bloque de madera entre la cuchilla y la caja de la segadora y apdete el perno de la cuchilla gird.ndolo en el sentido en qua giran las manillas del reioj. • La torsi6n pare apretar recomendada es de 35 - 40 pies libras. IMPORTANTE: El perno de la cuchilla es clase 8 tratado e calo. PARA AFILAR LA CUCHILLA AVISO: No recomendamos el afilar la cuchilla - pero si Io hace, asegQrese de que quede balanceada. Se tiene qua tener cuidado de mantener_a balanceada. Una cuchilla qua no estd balanceada va a producir eventualmente dafio en la segadora o en el motor. • La cuchilla puede alilarse con una lima o en una rueda rectificadora. No trate de afilaffa mientras se encuentra en la segadora. • Para revisar el balance de la cuchiUa, clave un clavo en una viga o en la pared. Deje alrededor de una pulgada de un clavo recto expuesto. Ponga el agujero central de _a cuchilla sobre la cabeza del clavo. Si la cuchilla est& balanceada debe permanecer en la posicibn horizontal. Si cualquiera de los extremos de la cuchilla se mueve hacia abajo, afile el extremo pesado hasta que _sla quede balanceada. Adaptadorde la cuchilla_/_""_ haveter°de! Arandela deseguddad_)._-,._/ _ 1. emo 27cuchilla . Bordede salida " u6nal Adaptadorde lacuchilla RECOGEDOR DE CESPED PARA CAMBIAR EL ACEITE DEL MOTOR • E| recogedor de odsped puede ser rociado con el agua de la manguera pero tiene que estar seco cuando se vaya a usar. * Revise su recogedor de c_sped a menudo para verilicar si est,. da_edo o detedorado. Se va a desgastar con el uso normal. Si se necesita cambiar el recogedor, cdmbielo solamente por uno que sea aprobado por el tabrlcante. Dd el n6mero del modelo de la segadora cuando Io ordene. AVISO: Antes de inclinar la segadora para drener el aceite, drene el tanque de combustible haciendo correr el motor hasta qua el tanque est_ vacio. t. Desconecte el alambre de la bujfa y p6ngalo de modo qua no pueda entrar en contaclo con dsta. 2. Remueva la tapa del depbsito del eceite; d6jela a un lado en una superficie limpia. 3. Incline la cortadora de cesped por este costado tat corno se muestra y purgue el aceite en un recipiente idbneo. Mueva la segadora de atrds para adelante para remover todo el aceite qua se haya quedado atrapado dentro del motor. 4. Limple todo el aceite derramado en la segadora yen el lado del motor. 5. Rellene el molor con aceite. (Vea "PARA AGREGAR EL ACEITE" en la secci6n de Operaci6n de este manual.) 6. Vuelva a conectar el alambre de la bujia a este. MOTOR LUBRICACI6N Use solamente aceite de detergente de aita calidad clasificado con la clasificeci6n SF-SJ de sewicio API. Seleccione la calidad de viscosidad SAE seg0n su lemperature de operaci6n esperada. SAE VISCOSI]Y GRADES AVISO: A pesar de qua los aceites de multiviscosidad (5W30, 10W30, etc.) mejoran el arranque en clime fr(o, estos aceiles de multiviscosidad van ha aumentar el consumo de aceite cuendo se usen en temperaturas sobre 32 ° F. Revise el nivel del aceite del motor rnds a menudo, para evitar un posible da_o en el motor, debido a que no tiene suficiente aceite. Cambie el aceite despuds de 25 horas de operaci6n o pot Io menos una vez al a_o si la segadora se utiliza menos 25 horas el aSo. Revise el nivel del eceite del critter antes de arrancar el motor y despu_s de ceda cinco (5) horas de uso conUnuado. Apdete el tap6n del aceite en forma segura cada vez clue revise el nivel del aceile. 'Envase 28 FILTRO DE AIRE Su motor pueda sufrir averl'as y funcionar de manera incorrecta con un filtro del aire sucio. Sustituir el papal del cartucho una vez al ar3oo tres 100 horas de luncionamiento, mds a menudo si se utiliza en condiciones de suciedad y polvo particulares. No lave el filtro de aire. PARA CAMBIAR EL FILTRO DE AIRE 1. Remueva el filtro de aire gir&ndolo en el sentido en que girela de las manillas del reloj para apretarla, hasta el tope, y refirelo del collar. 2. Remueva el filtro de la parte interior de la cubie_a. 3. Limpie la parte interior de la cubierta y el collar para remover toda acumulaci6n de mugre. 4. Inserte el filtre nuevo en la cubierta. 5. Ponga la cubierta del filtro de aire dentro del collar alineando la oreja con la ranura. 6. Empuje la cubierta hacia adentro y gfrela en el sentido contrario de las manillas del reloj para apretada. Collar SILENClADOR Inspeccione y cambie el silenciador si estd corrofdo puede producir un peligro de incendio y/o daSo. BUJI'AS Cambie las bujfas al comienzo de cada temporada de siega o despu6s de cada 100 horas de operaci6n, Io que suceda primero. El tipo de bujla y el ajuste de la abertura aparecen en =ESPECIFICACIONES DEL PRODUCTO" secci6n de este manual. Gireen el sentidoalas manillas del retojpara Abrazadera remover \ RaRur_ Filtrode alre' Oreja Cubierta del filtro de aire Gireen el sentido contrariolasmanillas delreloj para apreiar 29 LIMPIEZA IMPORTANTE: Pare obtener el mejor rendimiento, mantenga la caja de la segadore sin acumulacion de cesped y basura. Limpin la parte de abajo de su segadora despues de cada uso. _PRECAUCI(_N: Desconecte el alambre de la bujla y pbngalo en donde no pueda entrar en contacto con dsta. • Limpie la parte inferior de su segadora raspdndola para remover la acumulaci6n de c6sped y basura. • Limpie el motor a menudo para evitar qua se acumule la basure. Un motor tapado funciona mds caliente y se acorta su duraci6n. • Mantenga las superficies pulidas y las ruedas sin gasolina, aceite, etc. • No recomendamos el uso de una manguera de jardin para limpiar la segadora a menos qua el sistema el6ctrico, el silenciador, el filtro de aire y el carburador est_n tapados para evitar qua les entre el agua. El agua en el motor puede acortar la duraci6n de _ste. _PRECAUClSN: Antes de dar calquier servico o de hacer ajustes: 1. Suelte la barra de control y pare el motor. 2. Asegt_rese que Is cuchilla y que todas las partes movibles se hayan detenido completamente. 3. Desconecte el alambre de la bujia y pSngalo an donde no pueda entrar en contacto con dsta. SEGADORA PARA AJUSTAR LA ALTURA DE CORTE Vea "PARA AJUSTAR LA ALTURA DE CORTE" en la secci6n de Operaci6n de eats manual. DESVIADOR TRASERO Se proporciona un desviador trasem, adjunto entre las ruedas traseras de su segadora, para mducir a un minimo la posibilidad que objetos sean lanzados hacia afuere de la parle trasera de la segadora, an la posiciSn en donde se encuentra el operador. Si se da_a el desviador debe cambiarse. PARA AJUSTAR EL MANGO El mango puede set montado a una posici6n alta o baja. Los agujeros de montaje en el mango inferior estdn fuera del centro para levantar y bajar el mango. 1. Remueva el mango supedor y todas las partes atadas al mango inferior. 2. Remueva las clavijas de horquilla de la clavija de montaje del puntal del mango. 3. Apreite el mango inferior hacia dentro para removerlo de las clavijas de montaje. 4. Gire el mango inferior por encima para levantar o bajar el mango. 5. Vuelva a montar las clavijas de horquilla por encima de las clavijas de montaje. 6. Vuelva a montar el mango superior y todas las partes removidas del mango inferior. Mango inferior Gimr PARA MONTAR Y ADJUNTAR EL RECOGEDOR DE ClaSPED 1. Ponga el bastidor del recogedor de c_sped en la bolsa del c_sped con la parte dgida de la bolsa en la parke inferior.Aseg_rese qua el mango del bastidor estd en el exterior de la parts superior de la bolsa. 2. Deslice los sujetadores de vinilo sobre el bastidor. AVISO: Si los sujetadores de vinilo es_n muy dures, m_talos en agua caliente per algunos minutos. Si se moja la bolsa, dejela que se sequs antes de usada. /I, PRECAUCl6N: No haaa funcionar su segadore sin el desviador _e recortes o sin el recogedor de crisped, aprobados, en su lugar. Nunca trate de operar Is segadora cuando se ha removido la puerta trasere o cuando estd un poco abierta. Mangodel bastidordel "_ " VELOCIDAD DEL MOTOR La velocidad del motor ha sido ajustada en la fabdca. No trete de aumantar la velocidad del motor pues se pueden producir lesiones personales. Si cree que el motor est,. funcionando demasiado r_,pidoo demasiado lento, Ileve su segadora a contacto con su centro de ewicio Sears o con un otto centro de servicio cualificado para repararla o ajustarla. CARBURADOR Su carburador tiene un chorro principal fijo no ajustable pars controlar la mezcla. Si su motor no esta funcionando en forma adecuada debido a pmblemas que se sospecha vienen del carburador, Ileve su segadora a contacto con su centro de servicio Sears o con un otro centro de servicio cualificado para reparaHa y/ o ajustada. IMPORTANTE: Nunca manipule ei regulador del motor, el qua ha sido ajustado en la tabdca para la velocidad del motor adecuada. Puede ser peligroso hacer funcionar el motor a una velocidad por sobre el ajuste de alta velocidad de la fdbrica. Si cree que la velocidad alta regulada del motor necesita ajuste,contacto con su centre de servicio Sears o con un otto centro de servicio cualilicado, el qua cuenta con el equipo adecuado y la expedencia para 30hacer los ajustes necesarios. Inmediatamente prepare su segadora para el almacenamiento al final de cada temporada o si la unidad no se va a usar por 30 dias o m&s. SEGADORA Cuando se va a guardar la segadora por cierto periodo de tiempo, limpiela cuidadosamente, remueva toda la mugre, la grasa, las hojas, etc. Gudrdela en un area limpia y seca. 1. Limpie toda la segadora (Vea "LIMPIEZA" en la seccibn de Mantenimento de este manual). 2. Lubriquela segQn se muestra en la secci6n de Mantanimento de este manual. 3. Aseg_rese de que todas las tuercas y clavijas y todos los pemos y tornillos est_n apretados en forma segura. Inspeccione las partes que se mueven para vedficar si estdn dai'iadas, quebradas o desgastadas. C.¢mbielas si es necesario. 4. Retoque todas las superficies que est_n oxidadas o con la pintura picada; use una lija antes de pintar. MANGO Puede doblar el mango de su segadora para el almacenamiento. 1. Apdete los extremos infedores del mango inferior entre s| hasta que el mango inferior quede separado del puntal del mango, luego mu_valo hacia adelante. 2. Suelte los pernos de montaje del mango superior Io suficiente como para permitir que el mango superior se pueda doblar hacia atrds. IMPORTANTE: Cuando doble el mango para el aJmacenamiento o el transporte, aseg_rese que Io doble seg0n se muestra o purde da_ar los cables de control. • Cuando prepare sus mangos a partir de la posici6n de almacenamiento, el mango inferior autom&ticamente se asegurard en la posici6n para segar. oinfenor Apriete para doblar del mango horquilla Barrade controlque _ Doblar fp,-.,. exigela presenciadel _ /_/ hacia ,_ _... operador J/// adelante_/ _)2 ///// para .._, /_ Mangosuperior almacenar// // Mango inferior _ t_'__-_.._-'_ "__ /_/_ - Z_,'_ _ /,7 Doblarhacia Pos,c,6nparasegar MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE: Es importante evitar que se formen depositos de coma en partes fundamentales del sistema de combustible tales como el carburador, el filtro del combustible, la manguera del combustible o en el estanque durante el almacenamiento. La expedencia tambien indica que los combustibles tambien indica que los combustibles mezclados con alcohol (conocido como gasohol o que tienen etanol o metanol) pueden atraer humedad, Io que conduce a la separacion y a la formacion de acidos durante el almacenamiento. La gasolina acidica puede danar el sistema de combustible de un motor durante el periodo de almacenamiento. 1. Drene el estanque de combustible. 2. Haga arrancar el motor y d_jelo funcionar hasta que las I[neas del combustible y el carburador estdn vacios. • Nunca use los productos para limpieza del carbumdor odel motor en el estanque de combustible pues se pueden producir dahos permanentes. • Use combustible nuevo la pr6xima temporada. AVISO: El estabilizador de combustible es una altemativa aceptable para reducir a un minimo la formaci6n de dep6sitos de goma en el combustible dumnte el periodo de almacenamiento. Agregue estabilizador a la gasolina en el estanque de combustible o en el envase para el almacena-miento. Siempre siga la pmpomibn de mezcla que se encuentra en el envase del estabilizador. Haga funcionar el motor por Io menos 10 minutos despuds de agregar el estabilizador, para perrnitirque este Ilegue al carburador. No drene la gasolina del estanque de gasolina y el carburador si se esta usando estabilizador de combustible. ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y c_.mbielocon aceite de motor limpio. {Vea "MOTOR" en la secci6n de Mantenimiento de este manual.) 31 ClLINDRO 1. Remueva la bujia. 2. Vacie 29 ml (una onza) de aceite a treves del agujero de la bujia en el cilindm. 3. Tire la manilla de arranque lentamente unas cuantas veces pare distribuir el aceite. 4. Cambie por una bujfa nueva. • Si es posible, guarde su unidad en un recinto cerrado y c0brala pare protegerla contra el polvo y la mugre. • Cubra su unidad con un Iorro protector adecuado que no retenga la humedad. No use pldstico. El pl_stico no puede respirar, Io que permite la formaci6n de condensaci6n, Io que producird la oxidaci6n de su unidad. IMPORTANTE: Nunca cubra la segadora mientras el motor y las areas de escape to davia estan calientes. _PRECAUCl6N: Nunca almacene la segadora con gasolina en el estanque dentro de un ediflcio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que se enfrle el motor antes de almacenade en algOn recinto cerrado. OTROS • No guarde la gasolina de una temporade a la otra. • Cambie el envase de la gasoline si se empieza a oxidar. La oxldaci6n y/o la mugre en su gasolina pmducir_,n pmblemas. IDENTIFICACI6N DE PROBLEMAS PROBLEMA _o a_anca CAUSA CORRECCION 1. Filtro de aire sucio. 2. Sin combustible. 3. Combustible rancio. 4. Agua en el combustible. 5. Alambre de la bujia desconectado. 6. Bujfa mala. 7. Cuchilla suelta o adeptador de la cuchilla quebrado. _. Barra de control en la posici6n suelta. 9. Barra de control defectuosa. Fake de fuerza 1. Cuchilla desgastada, doblada o suelta. 2. Altura de las ruedas dispareja. 3. Velocidad del motor lenta. 4. Acumulaci6n de cesped, hojas o basura debajo de la segadora. 5. Demasiado aceite en el motor. 6. Velocidad de recorride demasiado rdpida. Mal cortedlsparejo Cuchilla desgastada, doblade o suelta 2. Altura de las ruedas dispareja. 1. 3. Acumulaci6n de cdsped, hojas o basura debajo de la segadora. 32 1. Umpie/cambie el filtro de aim. 2. Llene el estanque de combus tible. 3. Drene el estanque y vuelva a Ilenarlo con combustible limpio y nuevo. 4. Drane el estanque de combus tible y el carburador y vuelva a Ilenar el estanque con gasoline nueva, 5. Conecte el alambre ala bujla. 6. Cambie la bujfa. 7. Apriete el pemo de la cuchilla cambie el adaptador de la cuchilla. 8. Presione la barra de control hacia el mango. 9. Cambie la barra de control. 1. Ajuste a la posici6n de "Corte mds alto". 2. Ajuste ala posici6n de "Corte mds alto". 3. Limpie/cambie el filtro de aim. 4. I..impie la parte inferior de la caja de la segadora, 5. Revise el nivel del aceite. 6. Corte a una velocided de recorddo m_,s lenta. 1. Cambie la cuchilla. Apriete el pemo de la cuchilla. 2. Ajuste todas las ruedas ala misma altura. 3. Limpie la parte inferior de la caja de la segadora. IDENTIFICACION PROBLEMA DEPROBLEMAS CORRECClON CAUSA Vlbracl6n excesiva 1. Cuchilla desgastada, doblada o suelta. 2. Cigue_al del motor doblaclo. Cambie la cuchilla. Apriete el pemo de la cuchilla. 2. P6ngase en contacto con su oentro de servicio Sears o con un otto centro de servicio cualificado. Cord6n arrancador diffcil de tirar 1. El freno del volante del motor estd aplicado cuando se suelta la barra de contml. 2. CigueSal del motor doblado. 1. Presione la barra de control hacia el mango superior antes de tirar el cord6n arrancador. 2. P6ngase en contacto con su cantro de servicio Sears o con un otro centro de servicio cualificado. 3. Cambie el adaptador de la cuchilla. 4. Mueva la segadora a un lugar en donde el cdsped ha sido cortado o a una superficie firme pare hacer arrancar el motor. 3. Ada_ador dela cuchilla quebrado. 4. Lacuchilla se a_astra en el c6sped. Recogedor de c6sped no se Ilena (slvlene equlpado) Dif_il de empujar 1. Altura de code demasiado baja. 2. Levantamiento de la cuchilla desgastado. 3. Recogedor sin ventilaci6n de aire. 1. El c_sped estd demasiado alto o la altura de la rueda demasiado baja. 2. Parte trasera de la caja/cuchilla de la segadora arrastr_,.ndose en el c6sped. 3. Recogedor de c6sped demasiado Ileno. 4. Poslci6n de la altura del mango no adecuada pare usted. 33 1, 1. Eleve la altura de code. 2. Cambie las cuchillas. 3. Limpie el recogedor de c6sped. 1, Eleve la altura de coda. 2. Eleve la parte trasera de la caja de la segadora (1) un lugar rods alto. 3. Vacfe el recogedor de c_sped 4. Ajuste la altura del mango de modo que le acomode. CRAFTSMAN ROTARY LAWN MOWER-- MODEL NUMBER 917,388013 7O 2 37 14 4O 14 68 25 27 22 19 4/1 67 _ 24 15 6 2O 33 30 37 37 40 ,tO 36 45 °55 -54 -53 CRAFTSMAN KEY NO. 1 2 3 4 5 6 7 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 29 30 32 33 34 36 37 PART NO. 869O2 169709X479 169708)(479 132001 132004 131959 66426 156577 750634 850733X004 136376 51793 165946X479 17600406 167132X004 167133X004 165858 168360X004 166875 751153 166111 X479 166112X479 851856 160835X007 19112222 169421X004 87877 165762)(004 160828 151157 ROTARY LAWN MOWER -- MODEL NUMBER DESCRIPTION ControlBar Upper Handle LowerHandle RopeGuide Locknut 1/4-20 HandleBolt WireTie Engine Zone ControlCable Hex Washer Head Screw #10-24 x 1/2 Up-Stop Bracket HandleKnob HairpinCotter Support Bracket Screw Axle Arm Assembly - LF Axle Arm Assembly - RF Rear Skirt Selector Spring Front Rear Door Assembly Kit (Incl. Springs) Locknut 5/16-18 Handle Bracket Assembly (Left) Handle Bracket Assembly (Right) Screw 1/4-20 x 3/8 Wheel Adjusting Bracket- Front Spacer Selector Spring Rear Selector Knob Axle Arm Assembly - LR Shoulder Bolt5/16-18 Wheel Assembly KEY NO. 39 40 41 42 43 44 45 46 48 52 53 54 55 56 57 67 68 70 -*° PART NO. 83923 77400 88652 165766 165767 165912 150406 85463 165761X004 166872 851084 850263 851074 175064 851514 166113 165755 - °* 161058 180_28 917.388013 DESCRIPTION Flanged Locknut Hubcap HingeScrew Spring(LH) Spring(RH) Door Bolt Hex Head Thread Rolling Screw 3/8-16 x 1 DangerDecal Axle Arm Assembly - RR Housing Assembly (Incl. Ref. #17, 18 & 46) Hex Head Screw 3/8-24 x 1-3/6 Grd. 8 HelicalLockwasher HardenedWasher 21" Blade BledeAdapter Grass Bag Catcher Frame Engine- Craftsman 143.016706 (See Breakdown) Warning Decal (Not Shown) Owners Manual Available accessories not includedwith lawn mower: 71 33623 Gas Can (2.5 gallon) 71 33500 Fuel Stabilizer 71 33000 SAE 30W Oil (20 oz.) 71 33088 ClippingDeflector NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.016706 _39087 _61 _370A .301 370C x292 ,285 400 290 _K-292 130 120 119 195 125 150 275, I I I 41 172 182 185 / 176 239 238 /_.,, 25O 36 CRAFTSMAN 4-CYCLE KEY PART NO. NO. DESCRIP11ON 1 2 6 7 37465 26727 33734 36557 ENGINE Cylinder (includes Key # 2 and 20) DowelPin Breather Element BreatherAssembly (includes Key Numbers 6 and 12A) 12 36775 BmatherTube 12A 36558 Breather Cover & Tube (Includes Key Number 12B) BreatherTube Elbow 12B 36694 Washer 14 28277 15 30589 Governor Rod (Includes Key #14) 16 34839A Governor Lever 17 31336 Governor LeverClamp 18 651018 Screw, Torx T-15, #8-32 x 19/64" 19 36281 Extension Spring Oil Seal 20 32600 Crankshaft 30 37464 4O 40(_7 Piston, Pin & Ring Set (Standard) 4O 40O28 Piston, Pin & Ring Set (.010" OS) 41 4O0_:5 Piston & Pin Assembly (Standard) (Includes Key Number 43) 41 40(_6 Piston & Pin Assembly (.010" OS) (includes Key Number 43) 42 40006 Ring Set (Standard) 42 40007 Ring Set (.010" Oversize) 43 20381 Piston Pin Retaining Ring 45 38777 Connecting Rod Assembly (Includes Key Number 46) 46 32610A Connecting Rod Bolt 48 27241 Valve Lifter 37460 Camshaft (ExhaustMCR) (includes Key Number 104) 52 29914 Oil Pump Assembly 69 37609 • Mounting Flange Gasket 70 37608 MountingFlange (includes Key Numbers 72 thru 83) 72 37614 Oil Drain Plug 75 27897 Oil Seal 80 30574A Governor Shaft 81 30590A Washer 30591 Governor Gear Assembly (includes Key Number 81) 83 30588A Governor Spool 86 650488 Screw, 1/4-20 x 1-1/4" 89 611004 Rywheel Key 90 611112 R/wheel 92 650815 BellevilleWasher 93 650816 RywheelNut 100 34443(3 Solid State ignition 101 610118 Spark Plug Cover 10Q 651007 Screw, Torx T-15, #10-24 x 15/16" 104 37480 Cam Bushing 110 37047 GroundWire 119 36787 " Cylinder Head Gasket 120 36825 CylinderHead 125 37288 Exhaust Valve (Standard) (Includes Key Number 151) 36780 Exhaust Valve (1132"Oversize) (Includes Key Number 151) 126 37289 Intake Valve (Standard) (Includes Key Number 151) 130 6021A Screw, 5/16-18 x 1-1/2" 135 37598 Resistor Spark Plug (RJ19LM4) MODEL NUMBER 143.016706 KEY NO. PART NO. DESCRIPTION 150 31672 161 31673 151A 40017 169 36783 172 36784 174 30200 178 29752 182 6201 184 26756 185 37466 186 32653 189 650839 191 36559A 195 610973 207 34336 216 33086 223 650451 224 36786 238 650932 239 34338 241 36919 245 36_05 250 37122 260 36980 261 30_00 262 650831 275 367SOA 277 650988 285 35000A 287 650926 290 29774 292 26460 298 28763 300 36916 301 36246 305 35647 306 37610 307 35499 309 650562 309A 650783 310 35648 311A 37611 313 34080 370A 36261 3"/0C 37318 370K 36695 370R 37317 380 640271 390 590737 400 3679_2B 417 900 Valve Spnng Valve Spring Cap Intake Valve Seal " Valve Cover Gasket Valve Cover Screw, #10-24 x 9/16" Nut & Lock Washer, 1/4-28 Screw, 1/4-28 x 7/8" * Carburetor To Intake Pipe Gasket Intake Pipe Govemor Link Screw, 1/4-20 x 3/8" S.E. Brake Bracket (Includes #195) TenminaJ Throttle Link R.P.M. Adjusting Lever Screw, 1/4-20 x 1" * Intake Pipe Gasket Screw, #10-32 x 49/64" *Gasket, AirCleaner Collar, Air Cleaner Filter, AirCleaner Cover, Air Cleaner BlowerHousing Screw, #10-24 x 9/16" Screw, 1/4-20 x 1/2" Muffler Screw, 1/4-20 x 2-5/16" Starter Cup Screw, #8-32 x 21/64" Fuel Une Clamp, FuelLine Screw, #10-32 x 35/64" FueITank (Includes #292 and 301) FuelCap Oil FillTube * "O"-Ring "O"-Ring Screw, #10-32 x 1/2" Screw, #10-24 x 3/4" Dipstick Hold Down Bracket Spacer LubricationDecal Prlmer Decal(3X) Starter Decal Hot Surface Decal Carburetor (Includes Key #184) Rewind Starter Gasket Set (Includes Ail Items Marked *) 36085 Spark Arrestor Kit (Optional) (Includes Key Number 417) 650760 Screw, #8-32 x 3/8" (Optional) 750865 Replacement S/B order from 71-999 ..... RPM: High 2900 to 3200 416 NOTE: This engine could have been built with Starter #590694. NOTE: Aimcomponent dimensionsgiven in U.S. inches 1 inch = 25.4 mm 37 CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.016706 _37 KEY PART NO. NO. 640_71 1 31615 2 31767 4 631184 5 631183 6 640070 7 650506 16 631807 17 651025 18 630766 2O 640027 2OA 64(_00 25 631867 27 631024 28 632O19 29 631028 30 631021 31 631022 35 640259 36 640080 36A 632766 37 632547 4O 640030 44 27110A 47 630748 48 631027 6O 632760B .. DESCRIPTION Carburetor (Includes Key #184 of Engine Pads List) Throttle Shaft & Lever Assembly Throttle Retum Spring * DustSealWasher " DuatSeai(Thmttle) Throttle Shutter * ShutterScrew Fuel Fitting Throttle Crack Screw/Idle Speed Screw Tension Spring Idle Restrictor Screw Idle RestrictorScrwe Cap (Black) Float Bowl " Float Shaft Float * Float Bowl=O"Ring * Inlet Needle, Seat, & Clip (Includes Key Number 31) SprlngClip PrimerBulb/Retainer Ring Main NozzleTube CarburetorTube * "O"Ring, Main Nozzle Tube High Speed Bowl Nut " BowlNutWasher * Welch Plug, Idle MixtureWell " Welch Plug, AtmosphedcVent Repair kit (Includes All Items Marked ") NOTE: Allcomponent dimensions given in U.S. inches. 1 inch = 25.4 mm 38 CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143o016706 I_'_f NO. PART NO. - 1 2 3 4 5 6 7 8 11 590694 590599A 590600 590696 590601 590697 590698 590699 590700 590695 12 13 590535 590701 DESCRIPTION Recoil Starter Spring Pin (Includes Key Number 4) Washer Retainer Washer Brake Spring Starter Dog Dog Spring Pulley & Rewind SpringAssembly Starter Housing Assembly (40 degree Grommet) Starter Rope (98" x 9/64" diameter) StouterHandle NOTE: Allcomponent dimensions given in U.S. inches 1 inch = 25.4 mm B_5 _1__14 PART NO° NO. - 3 6 7 8 It 5s0737 590740 590616 590617 5906t 8A 590687A 12 13 14 590535 590701 590760 DESCRIPTION RewindStarter Retainer St,_rterDog DogSpring Pulley & Rewind SpringAssembly Starter Housing Assembly (40 degree Grommet) Starter Rope (98" x 9/64" diameter) Starter Handle SpringClip NOTE: Allcomponent dimensions given in U.S, inches 1 inch = 25.4 mm 39 For repairof majorbrand appliances in your own home... no matterwho made it, no matter who sold iU 1-800-4-MY-HOME _ Any_rne, dayor_g_ (1-8oo-469-4663) (U.S.A. and Canada) WWW.sear_col'n WWW.._'s.ca For repair of carry-in products like vacuums, lawn equipment, and electronics, call for the nearest Sears Parts and Repair Center. 1-800-488-1222 Anytime, dayorrk_ (U.S_._ly) _w4w.,sear_corn For the replacement parts, accessories and owner's manuals that you need to do-it-yourself, call Sears PartsDirectS"! 1-800-366-PART (1-800-.._6-7278) 6 a.rn.-11 p.m., 7days aweek (U.SAorgy) www_irect To purchase or inquireabout a Sears Service Agreement or Sears Maintenance Agmernent 1-800-827-6655 (U.SJ_) 7 aJ_- 5 p.m., CST, Mor_- SaL Para pedr seMdo de repara::i_ a domic_io,y para ordenar p'P_.zas: 1"888-SU'-HOGAR_ (1-_TB4..G427) OSea_,_ 1-800-361-6665 (Canada) 9 &m.- 8 pJn.EST, M- F, 4 p.m.S_. Au Car_da p_r serviceen fl-ax;_s: 1.SIX).LE..FOYER _ (1-800-533_ www.sears.ca _d Co. ® Registered Trademark / TMTrademark / suService Mark of Sears, Roebuck and Co. ® Marca Registrada/'ru Marca de Fdbdca / SMMama de Servicio de Sears, Roebuck and Co. MCMarque de commerce / ao Marque deposde de Sears, Roebuck and Co. 180228 07.23.01 BY Printed in U.S.A.
This document in other languages
- español: Craftsman 917.388013