Download Ready Remote 24927 Installation guide

Remote Start Diagnostics
Remote Start Diagnostics:
Remote Start diagnostics are an important tool to diagnose the
status of the remote start system.
No Start Diagnostics:
If the system fails to activate Remote Start, Quick Stop, Daily
Start or Vacation Mode as expected, the parking lights will flash
to indicate the reason. Consult the No Start Diagnostic Chart.
No Start Diagnostic Chart
Remote Start
Feature
Any
LED
Description
Flashes
Indicates a loss of signal from the transmitter to
0
the system or a loss of power to the main unit.
Daily Start
3
Vacation Mode
3
Remote Start
5
QuickStop
5
© 2007 Directed Electronics
The unit is in the Valet Mode or Battery Voltage is
below 11v when attempting to activate this
feature.
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake, Hood or Ignition inputs
are active
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active
The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active
65