Download Sharp R-305MR Specifications

Figure 45
1Downflow
Vertical Vent
Figure 47
_Vent Pipe Flush with Adaptor
VENT PIPE ADAPTER WITH GASKET
INSTALLED ON FURNACE VENT
PIPE IS CUT FLUSH WITH TOP OF
ADAPTER.
Figure 48
Vent Pipe Flush Showing Coupling
ALIGN NOTCHES IN VENT PIPE
COUPLING OVER STAND-OFF
ON ADAPTER. TORQUE LOWER
CLAMP 15 LB-IN. WHEN REMAINING
VENT PIPE IS INSTALLED, TORQUE
UPPER CLAMP TO 15 LB-IN.
Requires Accessory Internal Vent Kit
See Specification Sheets for current kit number
Representative drawing only, some models may vary in appearance.
L11F063
Figure 46
Vent Coupling and Adapter with
Gaskets
Figure 49
_Combustion
Air Pipe
Point elbow down towards
back of fu mace
L
Vent Coupling and Adapter
12" MINIMUM
256.0 mm
Attach gaskets to vent pipe and combustion air adapters
CASING SIDE ATTACHMENT
COMBUSTION AIR PIPE
(ATTIC OR CRAWLSPACE
ONLY)
TOP PLATE ATTACHMENT
COMBUSTION AIR PIPE
(ATTIC
36
speoificati
.....
bject to change
withoutnotice.
OR CRAWLSPACE
ONLY)
Al1376
440 01 4201 01