Download MINDPRINT DTC Specifications
Transcript
MindPrint-DTC TM Technical Specifications This device features a two-channel design. All measured data disclosed herein refers to a single channel. The second channels data is for all intents and purposes identical to that of the first channel! All data related to levels is referenced to 0 dBu (0.775V RMS). Inputs : LINE IN: Input type: Input impedance: Sensitivity: Max. input level: SNR: Dynamic range: electronically balanced & floating 35 kΩ –12 dBu to +20 dBu +25.5 dBu –106 dB 123 dB MIC. IN: Input type: transformer balanced & floating Frequency bandwidth: 5 Hz to 127 kHz +/– 3 dB Input impedance: 5 kΩ Sensitivity: –68 dBu to + 22 dBu Max. input level: + 30 dBu @ –20 dB ON Max. input level: + 7,5 dBu @ –20dB OFF SNR: –131 dB Dynamic range: 122 dB INSTRUMENT IN: Input type: unbalanced Input impedance: 2,2 MΩ Sensitivity: –35 dBu to +3dBu Max. input level: +7 dBu Input noise voltage: –120.5 dB Dynamic range: 118 dB INSERT RETURN: Input type: electronically balanced & floating Input impedance: 44 kΩ 16 Sensitivity: Max. input level: dynamic range: 0 dBu +22 dBu 117 dB Outputs: LINE OUT XLR: Output type: Output impedance: Max. output level : electronically balanced & floating 220 Ω +25 dBu LINE OUT 1/4“ JACK: Output type: unbalanced Output impedance: 220 Ω Max. output level : +22.5 dBu INSERT SEND: Output type: electronically balanced & floating 220 Ω +22 dBu Output impedance: Max. output level : EQ Section: LO CUT: Corner frequency: 22 Hz - 220 Hz Slope: 24 dB/oct. HI CUT: Corner frequency: 3 kHz to 30 kHz Slope: 12 dB/oct. LF FILTER: Type: Shelving Corner frequency: 22 Hz - 700 Hz Boost: +15 dB Cut: –15 dB Q=0.15 to Q=3 , adjustable from ~6dB to ~24dB LMF FILTER: Type: Bell Corner frequency: 47 Hz - 1600 Hz Boost: +15 dB Cut: –25 dB Q=0.15 to Q=3 , adjustable from 6 octaves to 1/6 octave HMF FILTER: Type: Bell Corner frequency: 190 Hz - 13000 Hz Boost: +15 dB Cut: –25 dB Q=0.15 to Q=3 , adjustable from 6 octaves to 1/6 octave HF FILTER: Type: Shelving Corner frequency: 840 Hz - 30000 Hz Boost: +15 dB Cut: –15 dB Q=0.15 to Q=3 , adjustable from von ~6dB to ~24dB Tube Compressor Section: TYPE: Compressor / Limiter featuring tubes, optocoupler and Adaptive- ResponseTM. LIMIT: Controls limiting effect from +12dBFs to 0dBFs, and increase in compression from center to far right positions while limiting remains constant. Attack time : Release time : adjustable Filter: Signal range: 5 ms to 50ms, depending on signal 20 ms to 2000 ms, 300 Hz with 6dB per octave, switchable 109 dB to 113 dB depending on settings MASTER SECTION: Output level: – ∞ dB to +6dB Bypass: Removes EQ, Compressor/Limiter, Insert and Master section from the signal path. GENERAL MECHANICAL DATA: Dimensions: width: 482 mm height: 133 mm depth: 238 mm Rack dimensions: 19 “, 3 U; protrusion of controls: 23 mm Weight: 6.1 kg
This document in other languages
- Deutsch: MINDPRINT DTC