Download Agilent Technologies 4285A Instruction manual

Figure 3-11. Connecting A Shorting Bar
g. Move the CURSOR to the SHORT eld. ON , OFF , and
MEAS SHORT will be displayed.
NNNNNNNN
NNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
h. Press MEAS SHORT to perform the SHORT correction data
measurement. Wait until the message SHORT measurement
completed. will be displayed on the system message line.
i. Press ON to set the SHORT correction function to ON.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNN
6. Connect a DUT to the test xture.
Insert the DUT into the 16047C's measurement contacts deeply as
shown in Figure 3-12.
3-12
Basic Measurement Examples