Download Epson Powerspan Specifications

SYSTem Subsystem
ZVx
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<1|2>:ADDRess
This command changes the IEC-bus address of the device selected as generator no. 1 or 2.
SYSTem:COMMunicate:GPIB:RDEVice:GENerator<1|2>: ADDRess 0...30
Syntax:
"SYST:COMM:GPIB:RDEV:GENerator1:ADDR 19"
Example:
Features:
*RST value:
SCPI:
device-specific
SYSTem:COMMunicate:GPIB:RDEVice:PMETer:ADDRess
This command changes the IEC-bus address of the device selected as power meter.
SYSTem:COMMunicate:GPIB:RDEVice:PMETer:ADDRess
Syntax:
"SYST:COMM:GPIB:RDEV:PMETer:ADDR 5"
Example:
Features:
*RST value:
SCPI:
0...30
device-specific
SYSTem:COMMunicate:PRINter<1|2>:ENUMerate:FIRSt?
This command queries the name of the first printer (in the list of printers) under Windows NT. The
numeric suffix in PRINter<1|2> is not significant.
The names of other installed printers can be queried with command SYSTem:COMMunicate:
PRINter:ENUMerate:NEXT?.
If no printer is configured an empty string is output.
Example:
"SYST:COMM:PRIN:ENUM:FIRS?"
Features:
*RST value:
SCPI:
device-specific
SYSTem:COMMunicate:PRINter<1|2>:ENUMerate:NEXT?
This command queries the name of the next printer installed under Windows NT. The numeric suffix
in PRINter<1|2> is not significant.
This command can only be sent after command SYSTem:COMMunicate:PRINter:
ENUMerate:FIRSt?.
An empty string is output after all printer names have been output.
Example:
"SYST:COMM:PRIN:ENUM:NEXT?"
Features:
*RST value:
SCPI:
1043.0009.50
device-specific
3.132
E-15