1
Download Agilent Technologies E6198B User manual
Transcript
5 Using Load Cards and Loads Load Card Capabilities Table 5-1 Load Card Capabilities Function Agilent E6175A Agilent E6176A Agilent E6177A Agilent U7177A Agilent E6178B Agilent N9377A Agilent N9378A Agilent N9379A Number of Channels (Max.) 8 16 24 24 8 16 dual load 24 quad load 48 dual load Number of Channels Unshared relays 4 16 24 24 8 16 24 48 Maximum Current per Channel 7.5A (15A peak) 7.5A (15A peak) 2A 2A 30A 7.5A (15A peak) 2A 2A Current Measuring with Sense Resistor Yes Yes No Yes No Yes No No Current Measuring with Current Transducer Yes No No No Yes No No No Flyback protection available (User Installed) Yes Yes No No Yes Yes No No • The Agilent E6175A 8-Channel High Current Load Card, with integral current sensing, is intended to be used with loads mounted on the card. A 9-inch by 4-inch area of sheet metal is open on the front of the card for mounting loads. The card is two slots wide to allow mounting of larger loads. • The Agilent E6176A 16-Channel High Current Load Card is a single-slot design, requiring externally mounted loads. This load card offers high load density for high current loads where current transducers and bridge drive configuration are not required. • The Agilent E6177A 24-Channel Medium Current Load Card (for non-inductive loads) is intended to be used with loads mounted on the card. A 9-inch by 4-inch area of sheet metal is open on the front of the card for mounting small loads. This card is one slot wide and capable of up to 2A continuous carry current. 5-2 E6198B Switch/Load Unit User Manual
