Download Eon Millennium Operating instructions
Transcript
❖ To return the telephone to normal operation, press the MESSAGE SEND button. The MESSAGE SEND button indicator changes to idle. If the MESSAGE RETRIEVE button indicator indicates ATTENTION, or if you hear transfer dial tone when you go off-hook, you have one or more voice messages waiting. To retrieve a voice message: Voice Mail Service ❖ Lift the handset. ❖ Press the MESSAGE RETRIEVE button, or dial the Message Retrieve access code, or dial the Message Send access code followed by the digit 2 if you are calling from the telephone for which the message was left, or the digit 0 if you are calling from any other telephone. ❖ Follow the voice prompts to retrieve, review, and/or clear any voice messages. ❖ Hang up when finished. ❖ When the mailbox has been cleared of all messages, the MESSAGE RETRIEVE button indicator changes to IDLE. If you press an idle MSGRB button in a system equipped with voice mail, you access your own mailbox. To leave a voice message: ❖ Lift the handset. ❖ Press the MESSAGE SEND button, or dial the Message Send access code plus 0. ❖ Follow the voice prompts to access the proper mailbox and leave a message. ❖ Exit the mailbox as instructed. ❖ Hang up. When several Millennium systems are networked, the systems can be programmed to allow a call to a station in a remote system to be redirected to a voice mailbox in one of the other systems by using call forward, DND/ busy intercept routing, or no answer routing. To leave a message in a mailbox in a remote system, dial the Message Send access code plus 5. This feature applies to the Millennium only. Monitor To monitor a busy station or line: ❖ Lift the handset. ❖ Press the MONITOR button, or dial the Monitor access code. The MONITOR button indicator changes to ACTIVE. ❖ When you hear system dial tone, dial the number (extension number, location access code plus a location number, or ACD Agent access code plus an agent number), or press a busy agent, trunk, or extension button. ❖ If monitoring is allowed, you hear confirmation tone. You or the monitored parties or both may hear call monitor tone. The MUSIC/MUTE button indicator changes to T-HOLD. Telephone Operating Instructions 55