Download BENDIX M-12-M-12R ANTILOCK MODULATOR Specifications

COOLING SYSTEM
between -30° F and -45° F (-34° C and
-43° C).
Desired
ELC/
Water
ratio:
Freeze
point °F
(°C)
Items in
0%
10%
15%
20%
25%
30%
35%
40%
45%
50%
55%
60%
65%
70%
75%
80%
85%
90% 100%
+32
(0)
+25
(-4)
+20
(-7)
+15
(-9)
+10
(-12)
+5
(-15)
-5
(-21)
-12
(-24)
-23
(-31)
-34
(-37)
-50
(-46)
-65
(-54)
-75
(-59)
-84
(-64)
-70
(-57)
-55
(-48)
-43
(-42)
-30
(-34)
-5
(-21)
bold are the recommended levels of concentration.
ELC Condition (Contamination
and Inhibitor Concentration)
Perform a visual inspection of the
ELC. It should have no cloudiness
or floating debris. Determine the
chemical inhibitor concentration level
by using an ELC-specific test kit or
test strips. Inhibitor concentration level
determines corrosion protection. If you
are concerned about possible coolant
quality, contamination, or mechanical
problems, submit a coolant sample for
analysis. Improper maintenance may
cause coolant degradation and could
result in damage to the cooling system
and engine components. Consult
your dealer or the ELC manufacturer’s
representative for recommended ELC
test kits, test strips, and laboratory
sample procedures.
Maintenance Schedule on page 5-12.
Never use filters that contain SCAs in
an ELC-filled system.
ELC Extender
5
Add ELC extender if necessary at the
maintenance interval under “Cooling”.
Coolant Filter
If your vehicle came with a
non-chemical filter (“blank filter”),
replace it only with a blank filter at the
interval specified in the Preventive
5-71