Download MTU 12 V 2000 P12 Operating instructions

7.3.2
Crankcase breather – Oil separator element replacement, diaphragm check
and replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
WARNING
Part No.
Qty.
Torque wrench, 6-50 Nm
F30027336
1
Ratchet adapter
F30027340
1
Engine oil
Filter element
(→ Spare Parts Catalog)
Diaphragm
(→ Spare Parts Catalog)
Gasket
(→ Spare Parts Catalog)
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
TIM-ID: 0000000017 - 008
Replacing oil separator element
1.
2.
3.
4.
Remove cover (2) with O-ring (3).
Remove filter element (1) from housing (4).
Insert new filter element in housing (4).
Install cover (2) with new O-ring.
5.
Use torque wrench to tighten the screws of cover (2) to the specified torque.
Name
Screw
6.
Size
Type
Lubricant
Value/Standard
Tightening torque
(Engine oil)
10 Nm −2 Nm
Replace further oil separator elements in the same way.
MS150025/02E 2012-10 | Task Description | 93