Download ACV MCBA Specifications
Transcript
• The parts may only be replaced by genuine factory parts. You will find a list of the spare parts and their reference number ACV to the end of this document. WHO SHOULD READ THESE INSTRUCTIONS These instructions should be read by: - the specifying engineer - the installer - the user - the service engineer • Specific regulation applicable in Belgium: The CO2 level, the air and gas flows and the gas / air ratio are factory set . Any field adjustments of those settings is not allowed in Belgium. The following symbols are used in this manual: Essential instruction for the correct operation of the installation. • It is important to switch the boiler off before carrying out any work. Essential instruction for the safety of persons and the environment. FRANCAIS • The burners are preset in our factory for use with natural gas [equivalent to G20]. SYMBOLS Danger of burns WARNINGS • Please, read carefully this manual before installing and commissioning the boiler. • It is prohibited to carry out any modifications to the inside of the appliance without the manufacturer’s prior and written agreement. • The product must be installed and serviced by trained engineers, in compliance with current standards. • Any failure to follow instructions relating to tests and test procedures may result in personal injury or risks of pollution. • To guarantee safe and correct operation of the appliance, it is important to have it serviced and maintained every year by an approved installer or maintenance company. IF YOU SMELL GAS: - Immediately shut off the gas intake. - Open windows for fresh air flowing. - Do not use any electrical appliances and do not actuate any switches. - Immediately notify your gas supplier and/or your installer. This documentation is part of the information delivered with the appliance and must be given to the user and stored in a safe place! An approved installer must carry out the assembly, commissioning, maintenance and repair of the system, in accordance with current standards in force. ACV shall not accept any responsibility for damage caused by noncompliant location of the system or by use of the parts or connections not approved by ACV for this application. • In case of anomaly, please call your service engineer. • Despite the strict quality standards imposed by ACV during the manufacture, inspection and transport of its appliances, you might notice some errors. Please report immediately any fault to your approved installer. Remember to note the fault code displayed on the screen. EN • 3 ITALIANO RECOMMENDATIONS The manufacturer reserves the right to change the technical characteristics and specification of its products without notice. The availability of some versions and their accessories is market dependant. DEUTSCH Danger of electrocution. ESPAÑOL The appliances carry the CE mark in accordance with the standards in force in the various countries (European Directives 92/42/EC “Efficiency”, 90/396/EC “Gas appliances”). They also carry the “HR-TOP” label (Gas condensation boilers). NEDERLANDS • There are no user accessible parts inside the boiler casing. APPLICABLE STANDARDS 664Y3000.A ENGLISH WARNINGS