Download Simplicity 430 User`s guide

Getting Started: Evaluating MSP430 USB
www.ti.com
6.4
FET Target Boards
For every MSP430 device, TI provides simple evaluation boards called "FET target boards".
Figure 14. MSP-TS430PN80USB FET Target Board for F552x
Table 6. FET Target Boards for USB-Equipped MSP430 Derivatives
USB-Equipped MSP430 Family
FET Target Board
MSP430F550x, MSP430F5510
MSP-TS430RGC64USB
MSP430F552x
MSP-TS430RGC64USB
MSP-TS430PN80USB
MSP430F563x, MSP430F663x
MSP-TS430PZ100USB
MSP430F565x, MSP430F665x
MSP-TS430PZ100USB
FET target boards are available for every MSP430 derivative, not just the MSP430F5529. However, they
do not have an on-board emulator, as the F5529 LaunchPad and F5529 Experimenter's Board do; and so
they require a FET Tool for emulation.
Figure 15. FET Tool (MSP-FET430UIF) Emulator
The FET Tool interfaces to hardware using the 14-pin JTAG header shown at left in Figure 14.
SLAA457A – September 2013 – Revised May 2014
Submit Documentation Feedback
Starting a USB Design Using MSP430™ MCUs
Copyright © 2013–2014, Texas Instruments Incorporated
23