Download VINCENT CD-S5 Specifications
Transcript
OPERATING THE APPLIANCE PLAYBACK FUNCTIONS Operation Button(s) Description Direct selection of a track You can start playing a track at any time by keying in the track number on the remote control. For numbers over 10, you must press the “+10” button Number keys as often as necessary until it shows the relevant first figure of the number and then you key in the second figure. If there is no track of the keyed-in (16) number on the CD, the player switches to “STOP” mode. If the player is paused, you cannot select any other track directly with the number buttons. (8)(22) STOP While a CD is being played, pressing this button stops the playing. If the player was in “PAUSE” mode, this mode will also be ended by pressing the “STOP” button. The total number of tracks on the CD and the total playing time appear in the display (1) again. This button is on both the front of the device and the remote control. (6)(29) NEXT When this button is pressed while the CD is playing, the current track stops playing and the next track in the sequence begins to play. If this button is pressed in “STOP” mode, you can choose all the CD tracks one after the other starting from track 01. Playback can then be started again with the “PLAY/PAUSE” button (7)(20), with the “STOP” button (8)(22) the player goes back to “STOP” mode. This button is located both on the front of the device and on the remote control. Skip to playback the previous track (5)(28) BACK If this button is pressed once while the CD is playing, the current track stops and the actual track starts playing from the start again. Further presses skip to playing the previous tracks in their playing sequence. If this button is pressed in the “STOP” mode, you can choose all the CD tracks in reverse order starting with the last track. Playback can then be started again with the “PLAY/PAUSE” button (7)(20). With the “STOP” button (8)(22) the player goes back to “STOP” mode. The button is located both on the front of the device and on the remote control. Fast forward (21) (FAST FORWARD) The track will be played at higher speed (fast forward) as long as you continue to hold down this button while the CD is playing. If the button is released, playback will continue at normal speed. If the CD play is stopped, then this button has no function. This play function too can only be used via the remote control. (23) (FAST BACK) The track will be played backwards at higher speed (“rewind”) as long as you continue to hold down this button while the CD is playing. If the button is released, play will continue at normal speed in a forward direction. If the CD playback is stopped, then this button has no function. This play function too can only be used via the remote control. Stop playback Skip to the following track Fast rewind Vincent 37
This document in other languages
- français: VINCENT CD-S5
- Deutsch: VINCENT CD-S5